Installing Cable Accessories - Huawei AP8030DN Installation And Maintenance Manual

Huawei AP8030DN & AP8130DN
Hardware Installation and Maintenance Guide
Figure 5-41 Testing the connection of an Ethernet cable
----End

5.1.4 Installing Cable Accessories

Precautions for Installing Cable Accessories
Tools
Use dedicated tools provided or specified by Huawei and follow the installation procedure
described here.
Bending Radius
Unless otherwise specified, bending radiuses (R) of cables or fibers must meet the requirements
listed in
Table 5-9 Bending radiuses of cables or fibers
Cable or Fiber
Ordinary cable
Issue 02 (2014-12-05)
NOTE
If a tester is not available, you can use a multimeter to perform a simple test, as shown in
NOTE
The illustrations in this document may differ from actual situations, but the installation methods remain
the same. For example, in this document, the adapters of cable connectors have separate interfaces. In the
actual situation, the adapters may have interfaces fixed on equipment.
Table 5-9.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Bending Radius (R)
In normal cases, R ≥ 2d. When the cable is
connected with a connector, R ≥ 5d.
5 Appendix
Figure 5-41.
67