Getac 9270D Service Manual page 148

4.28 Manageability Signals -2
Name
SATA5GP / GPIO49 /
TEMP_ALERT#
ACPRESENT /
GPIO31 (Mobile
Only)
SUS_PWR_DN_AC
K / GPIO30 (Mobile
Only)
NOTE: SLP_LAN#/GPIO29 may also be configured by ME FW in Sx/Moff. Please refer to
SLP_LAN#/GPIO29 signal description for details.
Type
Used as an alert (active low) to indicate to the external
controller (e.g EC or SIO) that temperatures are out of range
O
for the PCH or Graphics/Memory Controller or the Processor
Core.
Used in Mobile systems. Input signal from the Embedded
Controller to indicate AC power source or the system battery.
I Active High indicates AC power.
Note: This signal is required by Management Engine in M3
supporting platforms. Signal usage is optional otherwise.
Active High output signal asserted by the Intel ME to the
Embedded Controller, when it does not require the PCH
O
Suspend well to be powered. Note: This signal is required by
Management Engine in all platforms.
Description