Getac V200 User Manual
  1. Manuals
  2. Brands
  3. Getac Manuals
  4. Laptop
  5. V200
  6. User manual

Getac V200 User Manual

Rugged computer
Hide thumbs Also See for V200:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual, User Manual
V200
USER'S MANUAL
Rugged Mobile Computing Solutions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the V200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Getac V200

Summary of Contents for Getac V200

  • Page 1 V200 USER’S MANUAL Rugged Mobile Computing Solutions...
  • Page 2 Most screens and operating instructions in this manual are based on Windows 7. If you’re using a different version of Windows, the screens and related operations may not be the same. For the latest version of the manual, please visit the Getac website at www.getac.com.
  • Page 3 ® Please reference ENERGY STAR related information from www.energystar.gov. ® As an ENERGY STAR Partner, Getac Technology Corporation has ® determined that this product meets the ENERGY STAR guidelines for energy efficiency. ® An ENERGY STAR qualified computer uses 70 % less electricity than computers without enabled power management features.
  • Page 4 ® Over its lifetime, ENERGY STAR qualified equipment in a single home office (e.g., computer, monitor, printer, and fax) can save enough electricity to light an entire home for more than 4 years. Power management (“sleep settings”) on computers and monitors can result in much savings annually.

  • Page 5: Table Of Contents

    Table of Contents   Chapter 1 Getting Started ............. 1-1   Getting the Computer Running ..........1-2   Unpacking ................1-2   Connecting to AC Power ............ 1-3   Opening and Closing the Cover ........1-4   Operating in Tablet Mode ..........1-5  ...
  • Page 6   Function Keys ..............2-6   Fn Key .................. 2-6   Hot Keys ................2-6   Using the Touchpad ..............2-8   Configuring the Touchpad ..........2-10   Navigating on the Screen ............. 2-11   Using the Touchscreen ............. 2-11  ...
  • Page 7   Hibernation ................. 3-8   Power-Saving Tips ..............3-9   Chapter 4 Expanding Your Computer ........... 4-1   Connecting an External Monitor ........... 4-2   Connecting a Serial Device ............. 4-3   Connecting a USB Device ............4-4   Connecting an eSATA Device ..........4-5  ...
  • Page 8 Drivers on the First Page ..........6-10   Drivers on the Second Page ..........6-11   Drivers on the Third Page ..........6-12   Chapter 7 Using Getac Software ........... 7-1   Using G-Manager ..............7-2   Using Button Manager ............7-4   Chapter 8 Caring for the Computer ..........
  • Page 9   Sound Problems ..............9-8   Startup Problems ..............9-9   WLAN Problems ..............9-10   Other Problems ..............9-11   Resetting the Computer ............9-12   Appendix A Specifications ............... A-1   Appendix B Regulatory Information ..........B-1   On the Use of the System ............

  • Page 11: Chapter 1 Getting Started

    Chapter 1 Getting Started Congratulations on purchasing this rugged computer. This chapter first tells you step by step how to get the computer up and running. Then, you will find a section briefly introducing the external components of the computer. Getting Started...

  • Page 12: Getting The Computer Running

    Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter − AC power cord −...

  • Page 13: Connecting To Ac Power

    Connecting to AC Power The computer operates either on the external AC power or internal battery power. It is suggested that you use AC power when you start up the computer for the very first time. CAUTION: Use only the AC adapter included with your computer. Using other AC adapters may damage the computer.

  • Page 14: Opening And Closing The Cover

    CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord.

  • Page 15: Operating In Tablet Mode

    To close the top cover: 1. Close the display. 2. Lift the cover latch and engage the clamp on the display. Then, push in the cover latch to click it into place. Operating in Tablet Mode In addition to being used as a regular notebook computer (Laptop mode), your computer can also be operated in Tablet mode.
  • Page 16 3. Close the computer with the display facing up. 4. Lift the cover latch and engage the clamp on the display. Then, push in the cover latch to click it into place. In Tablet mode, the computer can be operated while holding it as shown. A handgrip strap is supplied to help you hold the computer.

  • Page 17: Turning On And Off The Computer

    To return to Laptop mode, perform the steps for changing the computer into Tablet mode in reverse order. Turning On and Off the Computer Turning On 1. Make sure that the computer is connected to AC power. 2. Press the power button ( 3.

  • Page 18: Taking A Look At The Computer

    Taking a Look at the Computer NOTE: Depending on the model you purchased, the appearance of your computer may not be exactly the same as those shown in this manual. You need to open the protective covers to access the connectors. When not using a connector, make sure to close the cover completely for water- and dust-proof integrity.
  • Page 19 Ref Component Description Can be re-defined using the OSD utility. (See “Using Button Manager” in Chapter 7 for information.) RF Button Toggles the wireless LAN /Bluetooth/3G radio frequency ON and OFF. Can be re-defined using the OSD utility. (See “Using Button Manager”...

  • Page 20: Rear Components

    Rear Components Component Description Strap Holder Two buckles (option) hold the shoulder strap. Four bottom hooks hold the handgrip strap. Audio Output Connects a set of headphones, external speakers Connector with amplifier, or an audio recording device. Microphone Connects an external microphone. Connector USB Port Connects a USB device, such as a flash disk, printer,...

  • Page 21: Right-Side Components

    Right-Side Components Component Description Battery Pack Inside is the battery pack that supplies power to Compartment your computer when external power is not connected. Hard Disk Drive Inside is the hard disk drive. Compartment Left-Side Components 1-11 Getting Started...
  • Page 22 Component Description Power Connector Connects the AC adapter. USB Port Connects a USB device, such as a flash disk, printer, digital camera, joystick, and more. eSATA/USB Connects an eSATA device such as an external hard Combo Port drive or optical drive. Can also function as a USB port.

  • Page 23: Top-Open Components

    Top-open Components Component Description Webcam Lens Allows you to use your computer’s camera function. (option) The camera lens can be rotated. LCD Screen Displays the output of the computer. May include the optional touchscreen feature. Light Sensor Detects the surrounding lighting condition for automatic adjustment of the LCD brightness and optional keyboard backlight.
  • Page 24 Component Description Indicators Show the current status of the computer’s devices. Lights green when the computer is turned on. Power Lights yellow when the computer is in Sleep mode. Lights green when the battery is fully charged. Battery Charge Lights yellow when the battery is being charged. Blinks yellow when the battery’s capacity is below 10%.

  • Page 25: Bottom Components

    Bottom Components Component Description Expansion Bus Inside is the expansion bus connector for using the Connector Port Replicator option. Memory Slots Inside are the memory slots for expanding the memory size of your computer. 1-15 Getting Started...

  • Page 26: Using The Accessories

    Using the Accessories Using the Tether (Optional) A tether is provided for attaching the stylus to your computer. 1. Insert one of the tether’s loop ends through the hole of the stylus (as indicated by below). Then, insert the other end through the first loop (as indicated by below) and pull it tight.

  • Page 27: Attaching The Handgrip Strap

    Attaching the Handgrip Strap To use the handgrip strap, attach its four loops to the four bottom hooks on your computer. Make sure the loops are securely hooked. When you need to operate and hold your computer at the same time, insert your hand through the strap for a firm grip.

  • Page 28: Attaching The Shoulder Strap

    Attaching the Shoulder Strap To use the shoulder strap, secure the snap hooks to the two buckles on your computer. (Select models have four buckles for different positioning of the strap.) CAUTION: The strap has been designed to carry only the weight of the computer. Therefore, be sure that the strap does not carry a weight that exceeds the weight of the computer.

  • Page 29: Operating Your Computer

    Chapter 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user, you may choose to read only the parts containing information unique to your computer.

  • Page 30: Starting And Stopping The Computer

    Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk.
  • Page 31 To stop in this Do this... To start up or mode... resume again Standby/Sleep Depending on your settings in Press any key. Windows, you can place the computer in Standby/Sleep mode by: • Closing the display cover • Pressing the Fn+F12 hot key •...

  • Page 32: Using The Internal Keyboard

    Using the Internal Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus an Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys...

  • Page 33: Numeric Keypad

    Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next: Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTE: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn...

  • Page 34: Function Keys

    Function Keys On the top row of the keys are the function keys: F1 to F12. Function keys are multi-purpose keys that perform functions defined by individual programs. Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key.

  • Page 35: Windows Keys

    Description Switches the display output when external devices are connected. NOTE: This function only applies to Plug & Play display devices. Decreases the LCD brightness (20 levels). Increases the LCD brightness (20 levels). Switches the touchscreen on and off (option). Switches the touchpad on and off.

  • Page 36: Using The Touchpad

    Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force.
  • Page 37 Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double-click Press and release the left button twice in quick succession. –or–...

  • Page 38: Configuring The Touchpad

    Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vice versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.

  • Page 39: Navigating On The Screen

    Navigating on the Screen The screen of your computer is touch-sensitive. You can control the location of the cursor/pointer on the screen using your finger or the included stylus or digitizer pen to communicate with the computer. CAUTION: Do not use sharp objects on the LCD display. Doing so may damage the display surface.

  • Page 40: Using Multi-Touch Gestures (Windows 7 Only)

    Here are some common terms that you should know when using the touchscreen: Term Action Click/Point Tap gently on the touchscreen. Double-click Tap twice on the touchscreen rapidly. Drag and Tap lightly on the touchscreen and move your finger drop until you reach your destination (drag).
  • Page 41 Gestures Actions Descriptions = finger down; = finger up) Zoom Use zooming to make (Pinch) an item (a photo for example) on the screen larger or smaller. The gesture works in applications that Move two fingers apart/toward each support mouse wheel other.
  • Page 42 Gestures Actions Descriptions = finger down; = finger up) Two- The function is defined finger by applications that support the specific gesture. Tap two fingers at the same time (where the target is in the midpoint between the fingers). Flicks Flick left or right to navigate back and forward in a browser...

  • Page 43: Using The Dual Mode Display (Optional)

    Using the Dual Mode Display (Optional) Dual mode display incorporates both touchscreen and digitizer functions. The display is set to Touchscreen mode by default. Touchscreen mode provides all the functionalities that an ordinary touchscreen has. When the computer receives signals from the active digitizer pen, the display automatically switches to Digitizer mode.
  • Page 44 Term Action Move Move the cursor pointed by the digitizer pen. Click/Point Tap gently on the display. Double-click Tap twice on the display rapidly. Drag and Tap lightly on the display and move your drop digitizer pen until you reach your destination (drag).
  • Page 45 The active digitizer feature cannot be used in the BIOS Setup program or when using the full screen in DOS mode. NOTE: You can move the cursor by bringing the digitizer pen close to the screen, without actually touching the screen’s surface. Do not move the digitizer pen too quickly.

  • Page 46: Using The Input Panel

    Using the Input Panel Use the Input Panel to enter text and perform various keyboard functions. There are two types of Input Panels for you to use in Windows 7: Touch Keyboard allows you to enter text by tapping the keys with your stylus, like pressing the keys on a standard keyboard.

  • Page 47: Using Osd Control Panel

    Using OSD Control Panel The OSD Control Panel allows you to easily activate or operate certain functions on your computer. To use the OSD Control Panel: 1. Press the button on the front of your computer. 2. The following screen appears, providing several control buttons. For detailed descriptions of the Control Panel, click the button.

  • Page 48: Using The Fingerprint Scanner (Optional)

    Using the Fingerprint Scanner (Optional) The fingerprint scanner provides a strong authentication mechanism based on fingerprint recognition. You can log on to your computer or sign in to a web site with your fingerprint instead of a password. You can also encrypt files and folders with your fingerprint.
  • Page 49 You can then use the Fingerprint Software to set up how the fingerprint authentication works. For detailed information, click Start All Programs Fingerprint Software Help. 2-21 Operating Your Computer...

  • Page 50: Using The Video Features

    Using the Video Features The video subsystem of your computer features: 12.1-inch wide TFT (Thin-Film Transistor) color LCD display with 1200×800 WXGA resolution Simultaneous display on LCD and external monitor Multi-display capability Built-in light sensor to automatically adjust the LCD brightness and optional keyboard backlight Power Management Sunlight-readable LCD display...

  • Page 51: Using Landscape Or Portrait View

    Using Landscape or Portrait View After Windows is started up, you can rotate the display and perform the touchscreen and active digitizer operations in the rotated mode. To rotate the display, press the button located on the front of your computer to open the OSD control panel and click .
  • Page 52 For a Model with 3G Module Primary Primary Secondary Primary Landscape Portrait Landscape Landscape Display Display Display Display NOTE: Due to SAR of FCC, a minimum distance of 20 cm must be maintained between the human body and the 3G antenna located on both sides of the LCD display.

  • Page 53: Using The Audio Features

    Using the Audio Features NOTE: If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Built-in sound system for recording and playing sound on your computer Azalia interface (high density audio codec) Built-in Speaker External audio connectors Ways of playing and recording sound vary with the operating system used.
  • Page 54 Audio Output Connector ( ) can be connected to speakers, headphones, or earphone set. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. NOTE: When using the external speakers/headphones or microphone, you cannot use the internal one. 2-26 Operating Your Computer...

  • Page 55: Using G-Camera Lite

    Using G-Camera Lite G-Camera Lite allows you to take pictures with the Webcam, if supplied with your computer. To start G-Camera Lite, click Start All Programs G-Camera Lite G-Camera Lite. The camera control panel appears. Mode Current settings Setting buttons for different modes Click the Shutter button or press Enter to take photos.

  • Page 56: Using The Network Features

    Using the Network Features Using the Modem The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board. To connect the telephone line to the modem, connect one end of the modem cable to the RJ-11 connector on the computer and the other end to the phone line.

  • Page 57: Using The Lan

    Using the LAN The internal 10/100/1000Base-T LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up to 1000 Mbps. To connect the network cable to the LAN module, connect one end of the LAN cable to the RJ-45 connector on the computer and the other end to the network hub.
  • Page 58 Technology 802.11a 802.11g 802.11n Stated Maximum 100 Mbps or more Throughput (Mbps) Data Rates (Mbps) 54, 48, 36, 24, 18, 54, 36, 18, 9 100 ~ 210 12, 9, 6 Band (GHz) 5.15 ~ 5.35 2.4 / 5 Modulation OFDM (Orthogonal OFDM Spatial Technology...

  • Page 59: Connecting To A Wireless Network

    Connecting to a Wireless Network To connect to a wireless network: 1. Make sure that the WLAN radio is on (as described in the previous section). 2. Tap the Wireless Network icon on the taskbar. (An orange light in the icon indicates connections are available.) 3.

  • Page 60: Using The Bluetooth Feature

    Using the Bluetooth Feature Your computer incorporates the Bluetooth capability for short-range (about 10 meters) wireless communications between devices without requiring a cable connection. With Bluetooth, data can be transmitted through walls, pockets and briefcases as long as two devices are within range. Turning On/Off the Bluetooth Radio 1.

  • Page 61: Connecting To Another Bluetooth Device

    Connecting to another Bluetooth Device 1. Make sure that the Bluetooth function is enabled (as described above). 2. Make sure that the target Bluetooth device is turned on, discoverable and within close range. (See the documentation that came with the Bluetooth device.) 3.
  • Page 62 5. Select the device to connect to and click Next. 6. Depending on the type of Bluetooth device that you want to connect to, you will need to enter the pertinent information. For detailed information on using the Bluetooth Utility, see the Bluetooth Utility Help.

  • Page 63: Chapter 3 Managing Power

    Chapter 3 Managing Power Your computer operates either on external AC power or on internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way.

  • Page 64: Ac Adapter

    AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer for the appropriate power cord.

  • Page 65: Battery Pack

    Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.

  • Page 66: Checking The Battery Level

    CAUTION: After the computer has been fully recharged, do not immediately disconnect and reconnect the AC adapter to charge it again. Doing so may damage the battery. NOTE: The battery level may automatically lessen due to the self-discharge process (0.21 % per day), even when the battery pack is fully charged (100 %).

  • Page 67: Replacing The Battery Pack

    The value of the corresponding green segment indicates the relative percentage of the battery charge. The battery pack is fully discharged when you see no segment glowing green. Replacing the Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs.

  • Page 68: Battery Low Signals And Actions

    5. With the ribbon strip facing outward, slide the new battery pack all the way into the slot. 6. Close the door. Make sure the door latch clicks into place. Then, slide the door lock toward the right. Battery Low Signals and Actions When the battery is low, Windows gives warning messages and the Battery Charge Indicator ( ) blinks yellow to alert you.

  • Page 69: Power Management

    Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows, power supply to different computer components is controlled on an as-needed basis. This allows maximum power conservation and performance at the same time.

  • Page 70: Hibernation

    Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the computer can be turned off. When you use the hibernation feature, you do not have to close the applications.

  • Page 71: Power-Saving Tips

    Power-Saving Tips Aside from enabling your computer’s power saving mode (see previous section), you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Shorten the length of time before Windows turn off the display.

  • Page 73: Expanding Your Computer

    Chapter 4 Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. Expanding Your Computer...

  • Page 74: Connecting An External Monitor

    Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external display monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.

  • Page 75: Connecting A Serial Device

    Connecting a Serial Device Your computer has one or two serial port (depending on model) for connecting a serial device such as a serial mouse or serial communication device (modem). Follow this procedure to connect a serial device: 1. Make sure the computer is not turned on 2.

  • Page 76: Connecting A Usb Device

    Connecting a USB Device Your computer has two USB ports for connecting USB devices, such as a digital camera, scanner, printer, modem, and mouse. NOTE: The eSATA/USB Combo port can also function as a USB port. The USB port support transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices.

  • Page 77: Connecting An Esata Device

    Connecting an eSATA Device Your computer has an eSATA/USB Combo port for connecting eSATA devices (such as an external hard drive and external optical drive) / USB devices (see previous section). The port supports SATA II with transfer rate up to 3.0Gbit/s. It can provide 5V power if a certified USB-eSata combo cable is used.

  • Page 78: Using Smart Cards (Optional)

    Using Smart Cards (Optional) Your computer may have a smart card reader. With an embedded microcontroller, smart cards have the unique ability to store large amounts of data, carry out their own on-card functions (e.g., encryption and mutual authentication), and interact intelligently with a smart card reader.

  • Page 79: Using Pc Cards

    Using PC Cards NOTE: Some PC cards require additional system resources. Before using such PC card, you may have to free other system resources for the PC card. Although some PC cards can be inserted and removed without turning off the computer, you cannot remove or install PC cards during Sleep/Standby mode.
  • Page 80 2. Select (highlight) the PC card from the list to disable the card. 3. Push the eject button and the card will slide out slightly. 4. Pull the card out of the slot. Expanding Your Computer...

  • Page 81: Using Expresscards (Optional)

    Using ExpressCards (Optional) NOTE: The ExpressCard interface is not compatible with the PC card interface. Your computer may have an ExpressCard slot. ExpressCard supports the PCI Express and USB 2.0 serial data interfaces (supporting speeds of up to 2.5 Gbps and 480 Mbps respectively), improving speed in data transfer while conserving power usage.
  • Page 82 To insert an ExpressCard: 1. Locate the ExpressCard slot on the left side of the computer (the upper one). 2. Slide the ExpressCard, with its label facing up, all the way into the slot until the rear connectors click into place. Eject button 3.

  • Page 83: Using The Sd Card Reader

    Using the SD Card Reader NOTE: If your hard disk is divided into several drives, make sure that all drives have been formatted before using the Card Reader. Otherwise, you may encounter problems when using the Card Reader. You can use only storage cards. Your Card Reader does not support cards with I/O (input/output) functions such as a wireless network card or Bluetooth card.

  • Page 84: Using The Port Replicator (Optional)

    Using the Port Replicator (Optional) NOTE: To use the port replicator, the Vehicle Dock driver supplied with your computer must be installed. A port replicator is available as an option. This device eliminates the hassles of having you connect and disconnect the various cables when carrying your computer around and allows a variety of peripherals to be connected including a headphone or microphone, etc.

  • Page 85: System Memory Upgrade

    System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 8 GB on the DDR3 SO-DIMM slot. CAUTION: RAM modules are extremely sensitive to static electricity. There are cases where static electricity generated by the human body has adversely affected such modules.
  • Page 86 4. To install the RAM module, match the module's notched part with the socket's projected part and firmly insert the module into the socket at a 20-degree angle. Then push down until the retaining clips lock the module into position. CAUTION: If the RAM module is difficult to insert or difficult to push down, do not force it.

  • Page 87: Using Bios Setup And System Recovery

    Chapter 5 Using BIOS Setup and System Recovery BIOS Setup Utility is a program for configuring the BIOS (Basic Input/ Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.

  • Page 88: Bios Setup

    You must press the F2 key quickly. The BIOS Setup Utility main screen appears as shown next. Main Advanced Security Boot Exit Model: V200-X SATA HDD: [INTEL SSDSA2M080G2GC] 80026MB System Time: [16:33:08] System Date: [07/05/2010] Processor Info: Intel(R)Core(TM)i7 CPU U620@2.00GHz...

  • Page 89: Main Menu

    The Main menu contains the system date and time settings as well as shows the basic configuration of the system. Main Advanced Security Boot Exit Model: V200-X SATA HDD: [INTEL SSDSA2M080G2GC] 80026MB System Time: [16:33:08] System Date: [07/05/2010] Processor Info: Intel(R)Core(TM)i7 CPU U620@2.00GHz...

  • Page 90: Advanced Menu

    Advanced Menu The Advanced menu contains the advanced settings as shown next. Main Advanced Security Boot Exit Item Specific Help Japanese Keyboard: [Disabled] Disabled SATA Mode [AHCI] Support Japanese Total Graphics Memory: [MaxDVMT] Keyboard USB Wake-Up From S3 [Disabled] High Brightness Thermal: [Disabled] TouchScreen: [Enabled]...
  • Page 91 Digitizer Type or TouchScreen (actual item shown depends on your model) Digitizer Type allows you to select the type of digitizer you are using. TouchScreen allows you to unconditionally disable it when set at Disabled Serial Port COM1/COM2/COM4 allows you to unconditionally disable it Disabled when set at Boot-time Diagnostic Screen allows you to display the diagnostic screen...

  • Page 92: Security Menu

    Security Menu The Security menu contains the security settings, which safeguard your system against unauthorized use. Main Advanced Security Boot Exit Item Specific Help Supervisor Password Is: User Password Is: Clear Supervisor Password controls access to the Set Supervisor Password: [Enter] Enter setup utility.
  • Page 93 Password on Boot allows you to enable or disable the entering of password for booting up your system. Once the password is successfully set and this item is enabled, it is required for booting up the system. TPM Support enables or disables TPM support. TPM (Trusted Platform Module) is a component on your computer’s mainboard that is specifically designed to enhance platform security by providing a protected space for key operations and other security critical tasks.

  • Page 94: Boot Menu

    Boot Menu The Boot menu sets the sequence of the devices to be searched for the operating system. Main Advanced Security Boot Exit Item Specific Help Boot priority order: 1: USB FDC: Keys used to view or 2: SATA HDD: INTEL SSDSA2M080G2GC – (S1) configure devices: 3: USB KEY: Up and Down arrows...

  • Page 95: Exit Menu

    Exit Menu The Exit menu displays ways of exiting BIOS Setup Utility. After finishing with your settings, you must save and exit so that the changes can take effect. Main Advanced Security Boot Exit Item Specific Help Exit Saving Changes Exit Discarding Changes Exit System Setup and Load Setup Defaults...

  • Page 96: System Recovery

    System Recovery Use System Recovery when: Your Windows operating system does not start at all. You want to restore the factory default Windows settings. WARNING: Using this feature will reinstall Windows to your system. All data on the hard disk drive will be lost. To run System Recovery: 1.
  • Page 97 1. The recovery software is solely the purpose of reinstalling or restoring software associated with the hard disk of this operating Getac machine. 2. Except the above, no other use is granted hereunder. **************************************** (1)Yes, I agree to the provisions of this agreement and wish to continue.
  • Page 98 5. After the recovery process has been completed successfully, the GSI (Getac Smart Installer) screen is displayed at the first boot-up of Windows operating system. 6. GSI will automatically perform system hardware detection and driver installation. After GSI has completed the whole process successfully, system will reboot.

  • Page 99: Installing Software Drivers And Utilities

    Chapter 6 Installing Software Drivers and Utilities To take full advantage of the unique features of your computer, drivers and utilities must be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers and utilities. If not, you need to install them using the disc supplied with your computer.

  • Page 100: How To Use The Driver Disc

    How to Use the Driver Disc NOTE: The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. This disc supports Windows XP, Windows Vista, and Windows 7. The available items may differ according to your computer model. Some items are for select models only.

  • Page 101: Installation For Windows Xp

    Installation for Windows XP After selecting the operating system Windows XP, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. CAUTION: Follow the sequence of the buttons to install the drivers. Drivers on the First Page Item Description...

  • Page 102: Drivers On The Second Page

    Item Description Touch Screen Installs the touchscreen driver/utility for using the touchscreen feature (select models only). Smart Card Installs the SmartCard driver for accessing SmartCards Reader (select models only). Drivers on the Second Page Item Description Finger print Installs the driver/utility for using the finger print feature (select models only).
  • Page 103 GPS Filter Works with the previous item. You must install this driver after installing the above driver to complete the GPS driver installation. Getac Utility Brings up a submenu as shown on the right. Getac Installs the G-Manager...

  • Page 104: Installation For Windows Vista

    Installation for Windows Vista After selecting the operating system Windows Vista, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. CAUTION: Follow the sequence of the buttons to install the drivers. Drivers on the First Page Item Description...

  • Page 105: Drivers On The Second Page

    Drivers on the Second Page Item Description Installs the GPS driver for using the GPS feature (select models only). The instructions for installing the GPS driver will appear. GPS Filter Works with the previous item. You must install this driver after installing the above driver to complete the GPS driver installation.

  • Page 106: Drivers On The Third Page

    Item Description WCDMA Brings up a submenu as shown on the right. Install the two items for using the 3G feature (select models only). Drivers on the Third Page Item Description Smart Card Installs the SmartCard driver for accessing SmartCards Reader (select models only).
  • Page 107 Installs the video capture Capture driver. USB to COM Installs the USB-to-COM driver. Installs the USB-to-LAN USB to LAN driver. Getac Utility Brings up a submenu as shown on the right. Installs the G-Manager Getac utility that manages and Manager configures various system resources.

  • Page 108: Installation For Windows 7

    Installation for Windows 7 After selecting the operating system Windows 7, the driver installation menu appears. To install a driver, just click the particular button and follow the onscreen instructions to complete the installation. CAUTION: Follow the sequence of the buttons to install the drivers. Drivers on the First Page Item Description...

  • Page 109: Drivers On The Second Page

    Item Description Touch Screen Installs the touchscreen driver/utility for using the touchscreen feature (select models only). Drivers on the Second Page Item Description Installs the GPS driver for using the GPS feature (select models only). The instructions for installing the GPS driver will appear.

  • Page 110: Drivers On The Third Page

    Item Description WCDMA Brings up a submenu as shown on the right. Install the two items for using the 3G feature (select models only). Drivers on the Third Page Item Description Smart Card Installs the SmartCard driver for accessing SmartCards Reader (select models only).
  • Page 111 Installs the video capture Capture driver. USB to COM Installs the USB-to-COM driver. Installs the USB-to-LAN USB to LAN driver. Getac Utility Brings up a submenu as shown on the right. Installs the G-Manager Getac utility that manages and Manager configures various system resources.

  • Page 113: Using Getac Software

    Chapter 7 Using Getac Software Getac software is provided for enhanced capabilities and management. This chapter describes how to use the software. Using Getac Software...

  • Page 114: Using G-Manager

    To start up G-Manager, do one of the following: Click Start All Programs Getac Utility, or Right-click on the Getac Utility icon ( ) located on the taskbar and click G-Manager. The screen as shown next appears. Using Getac Software...
  • Page 115 For detailed descriptions of G-Manager, click Using Getac Software...

  • Page 116: Using Button Manager

    You can use Button Manager to re-define the buttons. 1. Click Start Programs Button Manager Button Manager. The following screen appears. 2. Select the button to re-define. 3. Under the Update Button Function click the Key Name dropdown list to select a new button function. Using Getac Software...
  • Page 117 5. Click Save to save your configurations. 6. Click Start Flash to start the flash process, the percentage of flash process will be shown. 7. Click Load the next time you use Button Manager to load any previously saved configurations. Using Getac Software...

  • Page 119: Caring For The Computer

    Chapter 8 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering areas such as protecting, storing, cleaning, and traveling. Caring for the Computer...

  • Page 120: Protecting The Computer

    Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using an Anti-Virus Strategy You can install a virus-detecting program to monitor potential viruses that could damage your files.

  • Page 121: Using The Cable Lock

    Using the Cable Lock You can use a Kensington-type cable lock to protect your computer against theft. The cable lock is available in most computer stores. To use the lock, loop the lock cable around a stationary object such as a table.

  • Page 122: Taking Care Of The Computer

    Taking Care of the Computer Location Guidelines For optimal performance, use the computer where the recommended temperature is between 0°C (32°F) and 55°C (131°F) – actual operating temperature depending on product specifications. Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.

  • Page 123: Cleaning Guidelines

    a screen saver or other software that prevents the power management from working. Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth.

  • Page 124: Touchscreen Guidelines

    It is recommended that you do not charge the battery pack more than once a day. It is recommended that you charge the battery pack with the computer’s power off. To maintain the battery pack’s operating efficiency, store it in a cool dark place removed from the computer and with 30% ~ 40% charge remaining.
  • Page 125 To remove hard to remove dirt, blow some steam on the particular area and gently wipe away using a soft cloth. Turn off the computer power when cleaning the display. Cleaning the display with the power on may cause improper operation. Use the touchscreen within the intended area only.

  • Page 126: When Traveling

    When Traveling Before traveling with your computer, make a backup of your hard disk data into flash disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure that the battery pack is fully charged. Make sure that the computer is turned off and the top cover is securely closed.

  • Page 127: Chapter 9 Troubleshooting

    Chapter 9 Troubleshooting Computer problems can be caused by hardware, software, or both. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.

  • Page 128: Preliminary Checklist

    Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.

  • Page 129: Solving Common Problems

    Solving Common Problems Battery Problems The battery does not charge (Battery Charge indicator does not light yellow). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.

  • Page 130: Display Problems

    Make sure that the distance between the two devices are not over 10 meters or that there are no walls or other obstructions between the devices. Make sure that the other device is not in “Hidden” mode. Make sure that both devices are compatible. Display Problems Nothing appears on the screen.

  • Page 131: Hardware Device Problems

    Simultaneous display/multi-display does not work. Make sure that you turn on the external monitor before turning on the computer. Press the Fn+F5 hot key to toggle through the display options or change the settings in Display Properties in Windows. Hardware Device Problems The computer does not recognize a newly installed device.

  • Page 132: Keyboard, Mouse, And Touchpad Problems

    Keyboard, Mouse, and Touchpad Problems The keyboard does not respond. Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. Water or liquid is spilt into the keyboard. Immediately turn off the computer and unplug the AC adapter. Then turn the keyboard upside down to drain the liquid out of the keyboard.

  • Page 133: Modem Problems

    Make sure that the user name or password is correct. Modem Problems The modem does not work. Make sure that the modem driver is correctly installed. Make sure that the telephone line is properly connected. Make sure that the COM port in the communication software is correctly set.

  • Page 134: Software Problems

    The computer does not enter Sleep/Standby or Hibernation mode immediately. If the computer is performing an operation, it normally waits for the operation to finish. The computer does not resume from Sleep/Standby or Hibernation mode. The computer automatically enters Sleep/Standby or Hibernation mode when the battery pack is empty.

  • Page 135: Startup Problems

    Make sure that the audio driver is correctly installed. Make sure that the computer is not in Sleep/Standby mode. If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced. Make sure that the volume control is not set too high or too low. In most cases, a high setting can cause the audio electronics to distort the sound.

  • Page 136: Wlan Problems

    WLAN Problems I cannot use the WLAN feature. Make sure that the mini PCI-E WLAN card is correctly installed. Make sure that the necessary driver(s) is correctly installed. Make sure that the WLAN feature is turned on. Transmission quality is poor. Your computer may be in an out-of-range situation.

  • Page 137: Other Problems

    If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel. Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with. Make sure that your computer is configured with the same security option (encryption) to the Access Point.

  • Page 138: Resetting The Computer

    Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the computer operation seems to hang up, first wait. It is possible that the computer is processing data.

  • Page 139: Appendix A Specifications

    Appendix A Specifications NOTE: Specifications are subject to change without any prior notice. Parts Specifications ® Processor Intel i7-620UM, 2.0GHz, Max. 2.8 GHz with Intel Turbo Boost Technology Cache 512K L2, 4MB L3 Memory RAM (system) Up to 8 GB, 240-pin × 2, DDR3 SO-DIMM ®...
  • Page 140 Parts Specifications Keyboard Standard keys with numeric pad keys, 12 function keys, special Fn (Function) key and Windows keys Membrane keyboard, optional LED backlit membrane or rubber keyboard Pointing device Glide touchpad with 2 buttons, capacitance-type Hard disk drive SATA interface, 5400 rpm support, 9.5 mm height 2.5-inch diameter HDD heater for low temperature –20°C, solid state disk (option) PCMCIA...
  • Page 141 Parts Specifications Battery Li-ion smart 6-cell battery 5200 mAH / 11.1 V (option) Li-ion smart 9-cell battery 7800 mAH / 11.1 V user-swappable, under –20 C combined with hard drive low temperature solution Accessories (option) Stylus for touchscreen, active digitizer pen, vehicle docking (need to combine with docking connector) Dimension (L×W×H) 314×227×49 mm (12.4×8.74×1.93 inch)

  • Page 143: Appendix B Regulatory Information

    Appendix B Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix. Some notices apply to specific models only.

  • Page 144: On The Use Of The System

    On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 145: Ul1604 Installation Instructions

    Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.

  • Page 146: Safety Notices

    storm. There may be a remote risk of electric shock from lightning. − Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire.
  • Page 147 DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ. Entsorgung gebrauchter Batterien nach Angaben des Herstellers. FRENCH ATTENTION: II y a danger d’explosion s’il y a remplacement incorrect de la batterie.

  • Page 148: About The Modem

    About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.

  • Page 149: On The Use Of The Rf Device

    On the Use of the RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 150 The use of wireless devices on airplanes is governed by the Federal Aviation Administration (FAA). The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
  • Page 151 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.

  • Page 152: European Union Ce Marking And Compliance Notices

    Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
  • Page 153 Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
  • Page 154 General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “Turning Off the Wireless LAN Radio.”...
  • Page 155 Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges Indoors Outdoors (MHz) 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.

Table of Contents