Getac 9270D Service Manual page 82

4. Remove nine screws and carefully pull the antenna wire and two cables out. Then free the LCD assembly.
(Figure 2-15)
Figure 2-15 Free the LCD assembly
Reassembly
1. Attach the LCD assembly to the base unit and secure with nine screws. Reconnect the antenna wires and two cables.
2. Reconnect the antenna wires and two cables.
3. Replace the top cover and reconnect the touchpad cable, secure with nine screws.
4. Turn over the unit, reconnect one cable and secure with twenty-seven screws.
3. Replace the keyboard, ODD, HDD, DDR3, CPU and battery pack. (Refer to sections 2.3.6~2.3.1
Reassembly)