Getac 9270D Service Manual page 85

2.3.9 LCD Panel
Disassembly
1. Remove the LCD assembly and inverter board. (Refer to section 2.3.7 and 2.3.8 Disassembly)
2. Remove eight screws that secure the LCD brackets. (Figure 2-19)
3. Disconnect LCD cable to free the panel. (Figure 2-20)
Figure 2-19 Remove eight screws Figure 2-20 Free the LCD panel
Reassembly
1. Replace the cable to the LCD panel.
2. Attach the LCD panel's brackets back to LCD panel and secure with eight screws.
3. Replace the inverter board and LCD assembly. (See sections 2.3.8 and 2.3.7 Reassembly)