Getac 9270D Service Manual page 86

2.3.10 Audio Jack Board
Disassembly
1. Remove the LCD assembly. (Refer to sections 2.3.7 Disassembly)
2. Remove six screws fastening the shielding. Then remove the shielding. (Figure 2-21)
3. Remove one screw and disconnect two cables, then remove the audio jack board. (Figure 2-22)
Figure 2-21 Remove the shielding Figure 2-22 Remove the audio jack board
Reassembly
1. Replace the audio jack board and reconnect two cables, then secure with one screw.
2. Replace the shielding and secure with six screws.
3. Replace the LCD assembly. (See sections 2.3.7 Reassembly)