1. Manuals
  2. Brands
  3. Getac Manuals
  4. Laptop
  5. M220
  6. Operation manual

Getac M220 Operation Manual

Getac m220 notebook pc operation manual
Hide thumbs Also See for M220:
Table of Contents

Advertisement

Quick Links

Download this manual
M220
Operation Manual
Part Number: 799001151001R00
(24-Mar-062006)

Advertisement

Table of Contents
loading

Related Manuals for Getac M220

Summary of Contents for Getac M220

  • Page 1 M220 Operation Manual Part Number: 799001151001R00 (24-Mar-062006)
  • Page 2 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.

  • Page 3: Table Of Contents

    Table of Contents Preface ..................vii Chapter 1 Getting Started............1-1 Getting the Computer Running..........1-2 Unpacking ................1-2 Connecting to AC Power ...........1-2 Opening the Cover .............1-4 Powering the Computer .............1-4 Hard Disk Encryption ............1-6 Taking a Look at the Computer ..........1-8 Right-Side Components .............1-8 Left-Side Components ............1-9 Rear Components.............1-10...
  • Page 4 Euro Symbol ..............2-6 Windows Keys ..............2-6 Function Keys ..............2-6 Fn Key................2-7 Hot Keys ................2-7 Using the Touchpad ..............2-9 Configuring the Touchpad ..........2-11 Using the Touchscreen (option)..........2-12 Using the Hard Disk Drive ............2-13 Using the Optical Drive ............2-14 Installing the CD/Combo/DVD RW Drive ......2-15 Inserting and Removing a Disc ........2-16 Using the Video Features............2-17 Configuring the Display Modes ........2-17...
  • Page 5 Power-Saving Tips ..............3-10 Chapter 4 Expanding Your Computer ........4-1 Connecting an External Monitor ..........4-2 Connecting a USB Device ............4-4 Connecting the PS/2 Keyboard and Mouse ......4-5 Connecting a Parallel Device...........4-6 Connecting a Serial Device .............4-7 Connecting an IR Device............4-8 Using PC Cards ..............4-10 PC Card Type..............4-10 CardBus Support..............4-10 Inserting and Removing a PC Card........4-10...
  • Page 6 Location Guidelines ............7-4 General Guidelines.............7-4 Cleaning Guidelines ............7-5 Battery Pack Guidelines .............7-5 When Traveling ...............7-6 Chapter 8 Troubleshooting ........... 8-1 Preliminary Checklist ..............8-2 Solving Common Problems .............8-3 Battery Problems..............8-4 Optical Drive Problems............8-4 Display Problems ...............8-5 Hardware Device Problems..........8-7 Hard Disk Drive Problems ..........8-7 Infrared Problems...............8-7 Keyboard, Mouse and Touchpad Problems .......8-8 LAN Problems ..............8-9...
  • Page 7 European Union CE Marking and Compliance Notices ... B-9...

  • Page 9: Preface

    Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters and 2 appendices. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.

  • Page 10: Notational Conventions

    Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information that, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.
  • Page 11 M220 Operation Manual Part Number: 799001151001R00 (24-Mar-062006)
  • Page 12 TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE The information in this manual is subject to change without notice.
  • Page 13 Table of Contents Preface ..................vii Chapter 1 Getting Started............1-1 Getting the Computer Running..........1-2 Unpacking ................1-2 Connecting to AC Power ...........1-2 Opening the Cover .............1-4 Powering the Computer .............1-4 Hard Disk Encryption ............1-6 Taking a Look at the Computer ..........1-8 Right-Side Components .............1-8 Left-Side Components ............1-9 Rear Components.............1-10...
  • Page 14 Euro Symbol ..............2-6 Windows Keys ..............2-6 Function Keys ..............2-6 Fn Key................2-7 Hot Keys ................2-7 Using the Touchpad ..............2-9 Configuring the Touchpad ..........2-11 Using the Touchscreen (option)..........2-12 Using the Hard Disk Drive ............2-13 Using the Optical Drive ............2-14 Installing the CD/Combo/DVD RW Drive ......2-15 Inserting and Removing a Disc ........2-16 Using the Video Features............2-17 Configuring the Display Modes ........2-17...
  • Page 15 Power-Saving Tips ..............3-10 Chapter 4 Expanding Your Computer ........4-1 Connecting an External Monitor ..........4-2 Connecting a USB Device ............4-4 Connecting the PS/2 Keyboard and Mouse ......4-5 Connecting a Parallel Device...........4-6 Connecting a Serial Device .............4-7 Connecting an IR Device............4-8 Using PC Cards ..............4-10 PC Card Type..............4-10 CardBus Support..............4-10 Inserting and Removing a PC Card........4-10...
  • Page 16 Location Guidelines ............7-4 General Guidelines.............7-4 Cleaning Guidelines ............7-5 Battery Pack Guidelines .............7-5 When Traveling ...............7-6 Chapter 8 Troubleshooting ........... 8-1 Preliminary Checklist ..............8-2 Solving Common Problems .............8-3 Battery Problems..............8-4 Optical Drive Problems............8-4 Display Problems ...............8-5 Hardware Device Problems..........8-7 Hard Disk Drive Problems ..........8-7 Infrared Problems...............8-7 Keyboard, Mouse and Touchpad Problems .......8-8 LAN Problems ..............8-9...
  • Page 17 European Union CE Marking and Compliance Notices ... B-9...
  • Page 19 Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters and 2 appendices. Chapter 1, Getting Started, takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer, tells you how to use the computer’s components and features.
  • Page 20 Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important information that, if not followed, may result in loss of data or damage to the computer. Keyboard keys are shown in a bold typeset.

  • Page 21: Chapter 1 Getting Started

    CHAPTER Getting Started Congratulations on purchasing this computer. This high performance notebook computer is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure This chapter first tells you step by step how to get the computer up and running.

  • Page 22: Getting The Computer Running

    Getting the Computer Running This section guides you through the procedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items: Notebook computer Accessories: − AC adapter (100~240 VAC, 50/60 Hz) −...
  • Page 23 NOTE: Power Supply Cord: (optional) Detachable, minimum 1.5 m long. Listed, rated minimum 125 V, 7 A, having a 2/18 AWG, type SVT flexible cord. One end terminates with a parallel blade, molded-on, attachments plug with a 7 A, 125 V (NEMA 1-15P) configuration;...

  • Page 24: Opening The Cover

    CAUTION: When you disconnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse procedure may damage the AC adapter or the computer. When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges the battery pack.
  • Page 25 2. Press the power button. Power button 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer power, use the “Shut Down” command of your operating system.

  • Page 26: Hard Disk Encryption

    Hard Disk Encryption Your system includes hard disk encryption (including boot sector, operating system, temp and swap files) that ensures privacy and confidentiality of data and credentials stored on your hard drive. In contrast to software disk encryption, no clear text including pass phrases is ever stored on the hard drive or held in machine memory.
  • Page 27 2. Go to Security menu by using the keyboard’s arrow keys. Enter 3. Go to the item Hard Disk Encryption and press to enable it. A check mark ( ) indicates enabled; an underline (_) indicates disabled. Upon enabling this option, you will be asked to type in your hard disk key every boot up.

  • Page 28: Taking A Look At The Computer

    Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE: Depending on the model you purchased, the appearance of your computer may not exactly be the same as those shown in this manual. Right-Side Components Component Description...

  • Page 29: Left-Side Components

    Left-Side Components Component Description See Also CD/Combo/ Accepts a compact disc (CD) for installing or P. 2-14 DVD RW Drive loading software, accessing data, and playing music/video. Secondary You can purchase a secondary battery pack that P. 3-6 Battery Pack supplies power to your computer when external power is not connected.

  • Page 30: Rear Components

    Rear Components Component Description See Also IR Port Connects an IrDA-compliant device for wireless P. 4-8 data transfer. Power Connects the AC adapter. P. 1-3 Connector Serial Port Connects a serial device, such as an external P. 4-7 modem. Connects the telephone line. P.
  • Page 31 Component Description See Also Microphone Connects an external microphone. P. 2-21 Connector Getting Started 1-11...

  • Page 32: Front Components

    Front Components Component Description See Also Top Cover Locks the top cover. P. 1-4 Latch 1-12 Getting Started...
  • Page 33 Component Description See Also Device Show the current status of the computer’s Indicators devices. AC power indicator. P. 3-2 Glows green when the computer is using AC power. Battery Charge Indicator P. 3-3 Glows green when the battery is fully charged and connected to AC power.

  • Page 34: Bottom-Side Components

    Bottom-Side Components Component Description See Also Contains the SIM card slot for using the P. 2-26 SIM Card Slot GPRS/GSM function. Allows you to remove the CD/Combo/DVD RW P. 2-14 Release Knob drive as well as eject the secondary battery pack. P.

  • Page 35: Top-Open Components

    Top-open Components Component Description See Also Power Button Turns the computer power ON and OFF. P. 1-5 LCD Screen Displays the output of the computer. P. 2-18 Getting Started 1-15...
  • Page 36 Component Description See Also Device Show the current status of the computer’s Indicators devices. Power On Indicator xxxx Glows green when the computer is on. Glows amber when the computer is in standby mode. Hard Disk Drive Indicator P. 2-13 Blinks green when the hard disk drive is active.

  • Page 37: Where To Go From Here

    Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose… Do this… To know more about the computer… Go on to the next chapter. To install the operating system if your See the operating system manual.
  • Page 38 1-18 Getting Started...

  • Page 39: Chapter 2 Operating Your Computer

    CHAPTER Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer.

  • Page 40: Starting And Stopping The Computer

    Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk;...
  • Page 41 To stop in Do this… To start up or this mode… resume again Depending on your settings in Windows, Hibernation Press the power you can place the computer in button. Hibernation mode by: • Closing the display cover. • Pressing the power button •...

  • Page 42: Using The Keyboard

    Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a key added for specific functions. The standard functions of the keyboard can be further divided into four major categories: Typewriter keys Cursor-control keys Numeric keys Function keys Typewriter Keys...

  • Page 43: Cursor-Control Keys

    Cursor-Control Keys NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 15-key numeric keypad is embedded in the typewriter keys as shown next:...

  • Page 44: Euro Symbol

    Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTES: When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and then the letter without turning Num Lock off.

  • Page 45: Windows Keys

    Windows Keys The keyboard has two keys that perform Windows-specific functions: Windows Logo key and Application key. Windows Logo key opens the Start menu and performs software-specific functions when used in combination with other keys. Application key usually has the same effect as a right mouse click.
  • Page 46 Decreases the sound volume. Increases the sound volume. Decreases the LCD brightness. Increases the LCD brightness. Switches the LCD backlight on and off Switches LCD on and off. Description Switches the display output to one of the following when an external device is connected.

  • Page 47: Using The Touchpad

    Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTE: For optimal performance of the touchpad, keep your fingers and the pads clean and dry. When tapping on the pad, tap lightly. Do not use excessive force. The touchpad is a pointing device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.
  • Page 48 Term Action Point Move your finger on the pad until the cursor points to the selection on the screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double- Press and release the left button twice in quick succession. click –or–...

  • Page 49: Configuring The Touchpad

    Configuring the Touchpad You may want to configure the touchpad to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so To configure the touchpad, you can use the standard Microsoft or IBM PS/2 driver if you are using Windows.

  • Page 50: Using The Touchscreen (Option)

    Using the Touchscreen (option) CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. Use the included touchscreen pen (option) located on the handle. The touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and making selection with the buttons.

  • Page 51: Using The Hard Disk Drive

    Using the Hard Disk Drive Your computer comes with a removable hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where your operating system and application software programs are stored.

  • Page 52: Using The Optical Drive

    Using the Optical Drive Depending on the model, your computer comes with a CD, DVD dual recorder, or Combo drive located on the left side of the computer. This drive is usually configured as drive D. The drive uses removable 5.25-inch silver discs, which look like standard music CDs.

  • Page 53: Installing The Cd/Combo/Dvd Rw Drive

    NOTE: For Combo/DVD RW drive only. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation.

  • Page 54: Inserting And Removing A Disc

    Lift up and turn counter-clockwise Inserting and Removing a Disc Follow this procedure to insert or remove a disc. 1. Turn on the computer. 2. Open the optical drive bay cover by pressing on both sides of the release latch using your thumb and index fingers. 3.

  • Page 55: Using The Video Features

    Using the Video Features The video subsystem of your computer features: 14.1/15-inch TFT (Thin-Film Transistor) color LCD display with 1024 768 XGA (Extended Video Graphics Array) resolution. × 64 MB integrated video memory. Simultaneous display on LCD and external monitor, which is useful when you have a presentation as you can control the screen from your computer and face the audience at the same time.
  • Page 56 Your computer has been set to a default resolution and number of colors before shipment. You can view and change display settings through your operating system. See your operating system documentation or online help for specific information. For displaying in higher resolutions, you can connect an external CRT monitor that supports higher resolutions.

  • Page 57: Using The Audio Features

    Using the Audio Features NOTES: To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed (see chapter 6 for details). If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer features: Digital audio and analog mixing functions required for recording and playing sound on your computer...

  • Page 58: Connecting Audio Devices

    Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices. Microphone Connector ( ) can be connected to an external microphone for recording voice or sound. Audio Output Connector ( ) can be connected to the line-in connector of powered speakers with built-in amplifiers, headphones, or earphone set.

  • Page 59: Using The Communication Features

    Using the Communication Features Using the LAN NOTE for Windows 2000: To take advantage of the LAN (Local Area Network) feature, the device driver supplied with your computer must be installed (see chapter 6 for details). The internal 10/100Base-T Ethernet module allows you to connect your computer to a network.

  • Page 60: Configuring The Wlan

    To take advantage of the WLAN feature, make sure that the WLAN utility is installed correctly (see Chapter 6 for details). If your WLAN module was provided by your dealer instead of the computer manufacturer, contact your dealer for the correct driver to use. Configuring the WLAN After driver installation, you can use the WLAN utility to configure and monitor your WLAN connection.

  • Page 61: Using The Modem

    Using the Modem NOTE: To take advantage of the modem feature, the device driver supplied with your computer must be installed (see chapter 6 for details). The internal 56 K fax/data modem allows you to use the telephone line to communicate with others by fax, email, or connect to an online service or bulletin board.
  • Page 62 After you establish a subscription with a GSM/GPRS service provider, you can use the wireless data features of your computer. Check with your service provider for a list of available wireless data services. Your service provider may charge additional fees for use of data services. There are two methods for wirelessly connecting to an ISP or network: GSM data transmission (circuit-switched data) GSM data services enable you to use the GSM component of your...

  • Page 63: Using The Gps

    Configuring a GSM Modem Connection Before you can use the GSM modem connection, make sure that you have a subscription to the Circuit-Switched Data (CSD) network with your service provider and you have an account with your service provider or corporate network you are connecting to.

  • Page 64: Gps Setup

    Here's how GPS works in five logical steps: The basis of GPS is "triangulation" from satellites. To "triangulate," a GPS receiver measures distance using the travel time of radio signals. To measure travel time, GPS needs very accurate timing that it achieves with some tricks.
  • Page 65 3. Click on “Next” to continue. Operating Your Computer 2-27...
  • Page 66 4. When software installation appear the click on “Continue Anyway” to install. 5. When GPS driver complete then select “Yes, I wait to restart any computer” now when click on “Finish” to restart computer. 2-28 Operating Your Computer...
  • Page 67 6. Select “Install the software automatically “Recommended” when click on “Next” to continue. 7. The following screen appears. Then click on “Next”. Operating Your Computer 2-29...

  • Page 68: Using Bluetooth

    Using Bluetooth NOTE: To take advantage of the bluetooth feature, the Blue Tooth driver supplied with your computer must be installed (see chapter 6 for details). In general, Bluetooth is designed to be a cord replacement technology, allowing you to have a number of peripherals (for example, mouse, keyboard, printer, and PDA) that can all seamlessly connect to your computer without using wires.
  • Page 69 Operating Your Computer 2-31...

  • Page 70: Chapter 3 Managing Power

    CHAPTER Managing Power Your computer operates either on external AC power or internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include: What is an AC adapter How to charge the battery pack...

  • Page 71: Ac Adapter

    AC Adapter CAUTION: The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter. The AC power cord supplied with your computer is for use in the country where you purchased your computer.

  • Page 72: Battery Pack

    Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your applications often access peripherals, you will experience a shorter operating time.

  • Page 73: Initializing The Battery Pack

    Initializing the Battery Pack You need to initialize a new battery pack before using it for the first time or when the actual operating time of a battery pack is much less than expected. Initializing is the process of fully charging, discharging, and then charging.

  • Page 74: Using The Primary Battery Pack

    Using the Primary Battery Pack CAUTION: There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions. Do not attempt to disassemble the battery pack. To install the primary battery pack, follow these steps: 1.

  • Page 75: Using The Secondary Battery Pack

    Using the Secondary Battery Pack If you often rely on battery power for a long period of time while traveling, you may consider the purchase of an additional battery pack from your dealer and keep it with you in a fully charged state as a backup. To install the secondary battery pack, follow these steps: 1.

  • Page 76: Battery Low Signals And Actions

    NOTE: The system supports the battery hot-swap function, providing you the ability to replace the battery even during system on. Hot swap means that you can remove the secondary battery pack and replace it with another one without significant interruption to the system (without turning off the system).

  • Page 77: Power Management

    Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The power management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows 2000 and Windows XP, power supply to different computer components is controlled on an as-needed basis.

  • Page 78: Hibernation

    Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and normally they all have to be closed before the system can be turned off. When you use the hibernation feature, you do not have to close the applications.

  • Page 79: Power-Saving Tips

    Power-Saving Tips In addition to your computer’s automatic power management, you can do your part to maximize the battery’s operating time by following these suggestions. Do not disable Power Management. Decrease the LCD brightness to the lowest comfortable level. Disable the parallel and serial ports if no devices are connected to these ports.

  • Page 80: Chapter 4 Expanding Your Computer

    CHAPTER Expanding Your Computer You can expand the capabilities of your computer by connecting other peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices: External monitor USB device PS/2 keyboard and mouse...

  • Page 81: Connecting An External Monitor

    Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor to your computer. Follow this procedure to connect an external monitor: 1. Make sure that the computer is not turned on. 2.
  • Page 82 CAUTION: Do not disconnect the external monitor while the computer is in Standby mode or Hibernation mode. If no external monitor is connected when the computer resumes, the LCD remains blank and the output is not displayed. Expanding Your Computer...

  • Page 83: Connecting A Usb Device

    Connecting a USB Device Your computer has two USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem, and mouse. USB is specified to be an industry standard extension to the PC architecture.

  • Page 84: Connecting The Ps/2 Keyboard And Mouse

    Connecting the PS/2 Keyboard and Mouse If you want the benefits of a full-size keyboard or an external mouse, you can connect a PS/2 keyboard/mouse to your computer. When an external keyboard/mouse is connected, you can use both the external keyboard/mouse and the internal keyboard/touchpad at the same time.

  • Page 85: Connecting A Parallel Device

    Connecting a Parallel Device Your computer has a parallel port for connecting a parallel device such as printer. The port supports ECP (Extended Capabilities Port) and EPP (Enhanced Parallel Port) modes that turn the standard parallel port into a high-speed bi-directional peripheral port. Follow this procedure to connect a parallel device: 1.

  • Page 86: Connecting A Serial Device

    Connecting a Serial Device Your computer has a serial port for connecting a serial device such as an external modem. Follow this procedure to connect a serial device: 1. Make sure the “COM Ports” item is set properly in the SCU program. (See “Advanced Menu”...

  • Page 87: Connecting An Ir Device

    Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared-equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). Follow this procedure to connect an IR device: 1. Under Windows, make sure that the IrDA Fast Infrared Port is set to HP HSDL-2300/3600.
  • Page 88 Connect to IR device Expanding Your Computer...

  • Page 89: Using Pc Cards

    Using PC Cards Your computer has a PC card slot. PC cards are credit card-sized peripheral products based on the standards developed by PCMCIA (Personal Computer Memory Card International Association). PCMCIA is a non-profit association for promoting the interchangeability among mobile computers where ruggedness, low power, and small size are critical.
  • Page 90 Eject Button 3. When a new card is seated, the computer will detect it and try to install the appropriate driver. Follow the on-screen instructions to complete the process. To remove a PC card: 1. Double-click on the Safely Remove Hardware icon found on the Windows XP taskbar and the Safely Remove Hardware window appears on screen.

  • Page 91: System Memory Upgrade

    System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin PC2100/PC2700 DDR SO-DIMM slots. To install the SO-DIMM : 1. Carefully place the notebook computer upside down. 2. Remove the ten screws to detach the SO-DIMM compartment cover. 4-12 Expanding Your Computer...
  • Page 92 3. Remove the long rubber cushion on the left side and two short rubber cushions on the right side. 1 long rubber cushion 2 short rubber cushions 4. To install the SO-DIMM, match the SO-DIMM's notched part with the socket's projected part and firmly insert the SO-DIMM into the socket at a 20-degree angle.
  • Page 93 4-14 Expanding Your Computer...

  • Page 94: Chapter 5 Setup Configuration Utility (Scu)

    CHAPTER Setup Configuration Utility (SCU) SCU is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into instructions that the computer hardware can understand.

  • Page 95: When And How To Use The Scu Program

    When and How to Use the SCU Program When to Use You need to run the SCU program when: You see an error message on the screen requesting you to run Setup. You want to restore the factory default settings. You want to modify some specific settings according to the hardware.
  • Page 96 The menu can be divided into four areas: On the top line is the menu bar containing the titles of the available menus. Each menu title brings a specific menu. The center left column of the menu contains information regarding the current settings of the system.

  • Page 97: Moving Around And Making Selections

    Moving Around and Making Selections A brief description of keyboard usage is listed next: Function ←, → Selects a menu title. ↑, ↓ 1) Selects an item or option. 2) Brings up/down the value. Enter 1) Brings up the sub-menu when available. 2) Opens or closes the options window when an item is selected.

  • Page 98: Main Menu

    Main Menu Date and Time Setup Configuration Utility (SCU)

  • Page 99: Usb Emulation

    Sets the system time (Hour, Minute, Second) and date (Year, Month, Day). Internal Numlock Sets if you can enter a number when Num Lock is turned on. When this item is enabled and Num Lock is turned on, you can press a letter key to enter a number, and press and hold , then a letter key to enter a letter.

  • Page 100: Advanced Menu

    Advanced Menu Geyserville Support Setup Configuration Utility (SCU)
  • Page 101 Allows maximum CPU performance when using AC/car power but minimum CPU performance when using battery power. The available options are Enabled and Disabled . Make sure that your CPU & OS supports this function. Shared Video Memory (Optional) Note: if your computer is M11 ( ATI M11 discrete VGA controller with 64 MB memory) type, there is no this item to choose.

  • Page 102: Com Ports

    COM Ports Allows you to configure the COM ports of the computer. COM1/2/3/4 Settings sets the I/O (Input/Output) address and the Interrupt ReQuest line (IRQ) settings of the COM ports. The options are Disabled; COM1, 3F8, IRQ4; COM2, 2F8, IRQ3; COM3, 3E8, IRQ6;...
  • Page 103 This item configures the parallel port of the computer. Port Address sets the I/O address and the Interrupt ReQuest line settings of the parallel port. The options are None; LPT1, 378, IRQ7. MC97 Controller Enables or disables the system’s support for PCI modem device. A check mark ( ) indicates enabled;...

  • Page 104: Security Menu

    Security Menu Power-on Password Setup Configuration Utility (SCU) 5-11...
  • Page 105 Allows you to set the password for booting-up your system. When typing Num Lk the password, first make sure that is off, and then type the Enter password in the entry fields and press . Confirm your password by Enter typing it again and pressing .

  • Page 106: Hard Disk Boot Sector

    CAUTION: You must enable this option first before formatting your hard disk drive (HDD). Upon enabling this function, you will be asked to type in your HDD key. You must remember the HDD key as you need to type it every time you boot up your system.

  • Page 107: Boot Menu

    Boot Menu Boot Sequence 5-14 Setup Configuration Utility (SCU)
  • Page 108 Sets the first, second, third, and fourth booting device. The system will try to boot from the first device but if it is not available, will try the next boot device. If you set the first boot device to LAN Boot, the system will boot from the LAN server first.

  • Page 109: Exit Menu

    Exit Menu Save Changes and Exit saves the changes you have made and exit the SCU program. Discard Changes and Exit exits the SCU program without saving the changes you have made. Get Default Values loads factory default values for all the items. Load Previous Values restores previous values for all the items.
  • Page 110 Setup Configuration Utility (SCU) 5-17...

  • Page 111: Chapter 6 Installing Software Drivers

    CHAPTER Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the driver CD supplied with your computer.

  • Page 112: How To Use The Driver Cd

    How to Use the Driver CD NOTES: • The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. • You can always find README or document files on the driver CD. These files contain the latest information from the software supplier.
  • Page 113 To install the necessary driver, just click on the particular option and follow the onscreen instructions to continue and complete installation. Device driver Ensures the full function of the following drivers. Install this main driver before installing the device drivers. Upon clicking this icon, the chipset, VGA, audio, modem, and LAN drivers would be installed one after the other.

  • Page 114: Touchscreen Driver

    Blue Tooth Allows your computer to connect to bluetooth-compliant devices. Refer to the included USRGUIDE.pdf file located on the /BlueTooth/ directory of your driver CD for detailed instructions on using the Bluetooth feature of your computer. You need the Adobe Acrobat Reader program to open the file.
  • Page 115 7. Click on the four sides (points) and the plus-sign “+” on the screen to calibrate your touchscreen for use on the computer. Installing Software Drivers...
  • Page 116 Installing Software Drivers...

  • Page 117: Chapter 7 Caring For The Computer

    CHAPTER Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance: How to protect the computer What to note when using and storing the computer How to clean the computer What to note when using the battery pack...

  • Page 118: Protecting The Computer

    Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use.

  • Page 119: Using An Anti-Virus Strategy

    Using an Anti-Virus Strategy New viruses are always being developed nowadays and they are attacking computers even more easily with emails so commonly used worldwide. The Security feature of the SCU program protects the boot sector of the hard disk. To enable the function, see “Security Menu” in Chapter 5 for instructions.

  • Page 120: Taking Care Of The Computer

    Taking Care of the Computer Location Guidelines Use the computer where the temperature is between 0 °C (32 °F) and 55 °C (131 °F). Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.

  • Page 121: Cleaning Guidelines

    Cleaning Guidelines Never clean the computer with its power on. Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer. Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.

  • Page 122: When Traveling

    When Traveling Before traveling with your computer, make a backup of your hard disk data into floppy disks or other storage devices. As an added precaution, bring along an extra copy of your important data. Make sure the battery pack is fully charged. Make sure the computer is turned off.

  • Page 123: Chapter 8 Troubleshooting

    CHAPTER Troubleshooting Hardware, software, or a combination of both can cause computer problems. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what actions to take when solving common computer problems.

  • Page 124: Preliminary Checklist

    Preliminary Checklist Here are helpful hints to follow before you take further actions when you encounter any problem: Try to isolate which part of the computer is causing the problem. Make sure that you turn on all peripheral devices before turning on the computer.

  • Page 125: Solving Common Problems

    Solving Common Problems For easy reference, the problems are divided into these categories. Problem Type Go to Battery Problems P. 8-4 Optical Drive Problems P. 8-4 Display Problems P. 8-5 Hardware Device Problems P. 8-7 Hard Disk Drive Problems P. 8-7 Infrared Problems P.

  • Page 126: Battery Problems

    Battery Problems The battery does not charge (Battery Charge indicator does not light amber). Make sure that the AC adapter is properly connected. Make sure that the battery is not too hot. Allow time for the battery pack to return to room temperature. Make sure that the battery pack is installed correctly.

  • Page 127: Display Problems

    You cannot eject a disc. The disc is not properly seated in the drive. Manually release the disc following the method described next: 1. Turn off the system. 2. Insert a small rod, such as a straightened paperclip, into the drive’s manual eject hole and push firmly to release the tray.
  • Page 128 The brightness level might be too low. Increase brightness by pressing Fn+F6 The display output might be set to an external device. To switch the display back to the LCD, press , or change the display through the settings in Display Properties. Ctrl Reset the computer by pressing keys.

  • Page 129: Hardware Device Problems

    Hardware Device Problems The computer does not recognize a newly installed device. The device may not be correctly configured in the SCU program. Run the SCU program to identify the new type. Make sure if any device driver needs to be installed. (Refer to the documentation that came with the device.) Make sure if the device needs any jumper or switch settings.

  • Page 130: Keyboard, Mouse And Touchpad Problems

    Make sure that the device connected is using an equivalent speed. Make sure that the IrDA Fast Infrared Port is set to HP HSDL-2300/3600. Make sure that the IR port is set correctly in the SCU program. If you are printing to an infrared printer, make sure that the appropriate driver is installed.

  • Page 131: Lan Problems

    LAN Problems I cannot access the network. Make sure that the LAN driver is correctly installed. Make sure that the LAN cable is properly connected to the RJ-45 connector and the network hub. Make sure that the network configuration is appropriate. Make sure that the user name or password is correct.

  • Page 132: Modem Problems

    Your computer is not recognizing changes. Restart the computer. Make sure that the IP address or subnet mask setting is correct. I cannot communicate with the computer in the network when Infrastructure mode is configured. Make sure that the Access Point your computer is associated with is powered on and all the LEDs are working properly.

  • Page 133: Pc Card Problems

    Turn off power management. PC Card Problems The PC card does not work. Make sure that the PC card is correctly seated. If the card requires an IRQ (Interrupt ReQuest), make sure that there is one available. Or you can release another device IRQ in SCU. The PC card stops communicating properly.

  • Page 134: Printer Problems

    The computer does not enter Hibernation mode with the keys. Make sure that the Hibernation function is specified for the sleep button. Printer Problems The printer does not work. Make sure that the printer is turned on (if it comes with an independent power source) and is online (ready to use).

  • Page 135: Sound Problems

    Sound Problems No sound is produced. Make sure that the volume control is not set too low. Make sure that the audio driver is correctly installed. Make sure that the computer is not in Standby mode. If using an external speaker, make sure that the speaker is properly connected.

  • Page 136: Other Problems

    If you are using the battery power, make sure that the battery is not discharged. When you turn on the computer, it stops after POST. Restart your computer. The message “Non –System Hard disk boot sector invaled” appears on the screen after you turn on the computer. Make sure that there is no floppy disk in the floppy disk drive.
  • Page 137 After you have performed everything as described above and still have the incorrect date and time every time you turn on the computer, the RTC (Real-Time Clock) battery is at the end of its life. Call an authorized dealer to replace the RTC battery. Troubleshooting 8-15...

  • Page 138: Resetting The Computer

    Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data.

  • Page 139: Appendix A Specifications

    APPENDIX Specifications NOTE: Specifications are subject to change without any prior notices. Parts Specifications -Intel Dothan LV Processor, 1.6 GHz, dµ-FCBGA 400 MHz FSB, 2M L2 Cache Core logic -Intel 855GME Chipset + ICH4-M Memory -Two 200-pin PC2100/PC2700 DDR SODIMM sockets - Easy changeable - Standard: 256MB DDR SDRAM, Max.: 2 GB, DDR SDRAM VGA Controller...
  • Page 140 Bay 1 - Easy swappable bay for CD-ROM/COMBO Drive/ DVD Dual Recorder/2 Battery Keyboard - Waterproof membrane Keyboard - Factory Option water-proof Rubber Keyboard - Factory Option Back-light membrane keyboard - Factory Optional Back-light Rubber Keyboard Pointing device A touch-sensitive controller pad with resisting rain drops PCMCIA -Type II x 2 or Type III x 1 - CardBus support...
  • Page 141 Altitude According to IEC 68-2-13/MIL-STD-810F, Method 500.4 Operating: 15,000ft; Non-operating: 40,000ft Attitude change rate: 2,000ft/min Shock According to IEC 68-2-27MIL-STD-810F, Method 516.5 Operating: 15g, 11ms, half sine wave Non-operating: 50g, 11ms, half sine wave Drop According to IEC 68-2-32/MIL-STD-810F, Method 516.5 3 feet height free drop on steel plate, 4 feet height free drop on wood plate Intel test 26 times/one machine...

  • Page 142: Appendix B Regulatory Information

    APPENDIX Regulatory Information This appendix provides regulatory statements and safety notices on your computer. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix.

  • Page 143: On The Use Of The System

    On the Use of the System Class B Regulations Federal Communications Commission Radio Frequency Interference Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 144: Safety Notices

    Canada Canadian Department of Communications Radio Interference Regulations Class B Compliance Notice This Class B digital apparatus meets all requirements of the Canada Interference-Causing equipment regulations. Cet appareil numérique de Classe B respecte toutes les exigences du Règlement Canadien sur le matériel brouileur. This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications.
  • Page 145 ENGLISH CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the equipment manufacturer. Discard used batteries according to manufacturer's instructions. DEUTSCH VORSICHT: Explosionsgefahr bei unsachgemäßem Austausch der Batterie. Ersatz nur durch denselben oder einen vom Hersteller empfohlenen gleich-wertigen Typ.

  • Page 146: About The Modem

    About the Modem Caution Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Never touch non-insulated telephone wires or terminals unless the telephone line has been disconnected at the network interface. Use caution when installing or modifying telephone lines.

  • Page 147: On The Use Of Rf Device

    On the Use of RF Device NOTE: The information in this section applies to models with the wireless LAN module. USA and Canada Safety Requirements and Notices IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements, the antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
  • Page 148 The use of wireless devices in hospitals is restricted to the limits set forth by each hospital. Antenna use: In order to comply with FCC RF exposure limits, low gain integrated antennas should be located at a minimum distance of 20 cm (8 inches) or more from the body of all persons.
  • Page 149 EMC Requirements This device uses, generates and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission (FCC). This device complies with the limits for a Class B digital device pursuant to Part 15 subpart C of the FCC Rules and Regulations.

  • Page 150: European Union Ce Marking And Compliance Notices

    Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed outdoors is subject to licensing. Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit être utilisé...
  • Page 151 Greek To προϊόν αυτό πληροί τις προβλέψεις της Ευρωπαϊκής Οδηγίας 1999/5/EC. Icelandic Þessi vara stenst reglugerð Evrópska Efnahags Bandalagsins númer 1999/5/EC. Italian Questo prodotto è conforme alla Direttiva Europea 1999/5/EC. Norwegian Dette produktet er i henhold til bestemmelsene i det europeiske direktivet 1999/5/EC.
  • Page 152 General European standards dictate maximum radiated transmit power of 100 mW Effective Isotropic Radiated Power (EIRP) and the frequency range 2400 – 2483.5 MHz. Belgium and the Netherlands In Belgium and the Netherlands, the product may not be used outdoors. See the instructions next under the heading “How to Turn Off the Wireless LAN Radio.”...
  • Page 153 Departments in Which the Wireless LAN Module’s Maximum EIRP Not Shown in the Previous Table Frequency Ranges (MHz) Indoors Outdoors 2400 – 2446.5 10 mW Not permitted 2446.5 – 2483.5 100 mW 100 mW on private property with Ministry of Defense approval Turning Off the Wireless LAN Radio NOTE: Turning the wireless LAN radio off is not the same as disabling the wireless LAN card.
  • Page 154 APPENDIX Hard Disk Encryption This appendix provides more detailed information regarding hard disk encryption. NOTE: Marking labels located on the exterior of your computer indicate the regulations that your model complies with. Please check the marking labels and refer to the corresponding statements in this appendix.
  • Page 155 IMPORTANT: If you lose the HDD key, your dealer or the computer manufacturer will not be responsible for any loss of data. You will need to re-format your hard disk and thereby, lose all your original data. For customers’ special request of data saving, the computer manufacturer may try to recover lost data with the special tool as customers’...
  • Page 156 DES (Data Encryption Standard) was originally introduced by NSA (National Security Agency) and IBM and has since become a Federal data encryption standard as defined in FIPS 46-3 (Federal Information Processing Standard). DES works on 64-bit data segments with a 64-bit key of which 8 bits provide parity, resulting in a 56-bit effective length.
  • Page 157 There are no “backdoors” into X-Wall LX secret systems, so without the X-Wall Secret Key you will not be able to access the data or operating system on the protected disk. This means you must keep the backup key in a safe place at all times.

Table of Contents