Getac 9270D Service Manual page 95

4.3 Firmware Hub Interface Signals
Name
FWH[3:0] /
LAD[3:0]
FWH4 /
LFRAME#
INIT3_3V#
Type
Firmware Hub Signals. These signals are multiplexed with
I/O
the LPC address signals.
Firmware Hub Signals. This signal is multiplexed with the
O
LPC LFRAME# signal.
Initialization 3.3 V: INIT3_3V# is asserted by the Ibex Peak
O for 16 PCI clocks to reset the processor. This signal is intended
for Firmware Hub.
Description