Installation; Important Notice - Enterasys Matrix 7G4270-12 Hardware Installation Manual

Electrical Hazard: Only qualified personnel should perform installation procedures.
Riesgo Electrico: Solamente personal calificado debe realizar procedimientos de
instalacion.
Elektrischer Gefahrenhinweis: Installationen sollten nur durch ausgebildetes und
qualifiziertes Personal vorgenommen werden.
Read the Release Notes shipped with the DFE module to check for any exceptions to the
supported features and operation documented in this guide.
This chapter provides the instructions to install the 7H4382-49, 7H4383-49, 7G4270-12,
7G4202-30, and 7H4203-72 DFE modules.
Note: Unless otherwise noted, the installation instructions for the DFE modules apply to
all DFE modules.
Follow the order of the sections listed below to correctly install the DFE module.
•
Unpacking the Module
•
Installing an Optional Network Expansion Module
•
Installing an Optional Mini-GBIC
•
Backplane Connections and Installation Rules
•
Installing the DFE Module into the Matrix E7 or Matrix N7 Chassis
•
Installing the DFE Module into the Matrix N3, Matrix N1, or Matrix N5 Chassis
•
Connecting to the Network
•
Connecting to COM Port for Local Management
•
Completing the Installation

Important Notice

(Section 3.1)
(Section
(Section 3.7)
(Section 3.9)
(Section 3.2)
3.3)
(Section 3.4)
(Section 3.8)

Installation

(Section 3.5)
(Section
Installation
3
3.6)
3-1