Com Port Pinout Assignments; Regulatory Compliance; A.5 Regulatory Compliance - Enterasys Matrix 7G4270-12 Hardware Installation Manual

COM Port Pinout Assignments

A.4 COM PORT PINOUT ASSIGNMENTS
The COM port is a serial communications port for local access to Local Management. Refer to
Table A-12 for the COM port pin assignments.
Table A-12 COM Port Pin Assignments
Pin Signal Name
1 Transmit Data (XMT)
2 Data Carrier Detect (DCD)
3 Data Set Ready (DSR)
4 Receive Data (RCV)
5 Signal Ground (GND)
6 Data Terminal Ready (DTR)
7 Request to Send (RTS)
8 Clear to Send (CTS)
A.5

REGULATORY COMPLIANCE

The 7H4382-49, 7H4383-49, 7G4270-12, 7G4202-30, and 7H4203-72 meet the safety and
electromagnetic compatibility (EMC) requirements listed in
Table A-13 Compliance Standards
Regulatory Compliance
Safety
Electromagnetic Compatibility (EMC)
A-8 Specifications
Input/Output
Output
Output
Input
Input
NA
Output
Input
NA
Table
Standards
This product complies with the following: UL 60950,
CSA C22.2 No. 60950, 2006/95/EC, EN 60950, IEC
60950, EN 60825, 21 CFR 1040.10. The modules
that support laser connections also meet the
EN 60825 standard.
This product complies with the following: 47 CFR
Parts 2 and 15, CSA C108.8, 2004/108/EC, EN
55022, EN 61000-3-2, EN 61000-3-3, EN 55024,
AS/NZS CISPR 22, VCCI V-3.
A-13: