Mgbic-08 Specifications (1000Base-Elx - Enterasys Matrix 7G4270-12 Hardware Installation Manual

Gigabit Ethernet Specifications
Table A-8 MGBIC-LC09 Operating Range
Item
62.5 µm MMF
50 µm MMF
50 µm MMF
10 µm SMF
A.3.4

MGBIC-08 Specifications (1000BASE-ELX)

Table A-9 MGBIC-08 Optical Specifications
Item
Transmit Power (minimum)
Receive Sensitivity
Maximum Input Power
Link Power Budget
(Full Duplex Only)
1. The maximum drive distance (up to 70 km) depends on the quality of the installed single-mode fiber-optic
cable segment. Use the Link Power Budget to calculate the maximum cable length of the attached segment.
The Link Power Budget must not exceed those specified in this table. The MGBIC-08 input power must not
exceed -3 dBm. Otherwise, saturation could occur.
Table A-10 MGBIC-08 Operating Range
Item
9 or 10 µm SMF
A-6 Specifications
Modal Bandwidth @
1300 nm
500 MHz/km
400 MHz/km
500 MHz/km
N/A
-0 dBm, min.
-24 dBm, min.
-3 dBm
1
23 dB
1550 nm
N/A
Range
2-550 Meters
2-550 Meters
2-550 Meters
2-10,000 Meters
+2 dBm, typical
-26 dBm, typical
28dB, typical
Range
70,000 Meters
+5 dBm, max.