Example Of Cable Placement When Using Optional Rj21 Angle Adapters - Enterasys Matrix 7G4270-12 Hardware Installation Manual

Figure 3-14 Example of Cable Placement When Using Optional RJ21 Angle Adapters
4. Verify that a link exists by checking that the port RX (Receive) LED is ON (flashing amber,
blinking green, or solid green). If the RX LED is OFF and the TX (Transmit) LED is not blinking
amber, perform the following steps until it is on:
a. To view the receive and transmit activity on a group of segments, press the GROUP SELECT
button (see Figure
GROUP SELECT button is pressed, the GROUP LED lights up in sequence, indicating
which Group is selected. The receive and transmit activity for that group of segments is then
indicated by the RX and TX LEDs for each segment.
3-7) to step to the group of interest (Groups 1 through 4). Each time the
Connecting to the Network
Installation 3-23