Figure 7-31. Clear Partition Keyway Step Pol Board - Thermo Scientific 43iQ Instruction Manual

Thermo Scientific
Figure 7–31. Clear Partition Keyway Step POL Board
6. Slide step board 1 upwards clearing the partition panel keyway.
7. If replacing step board 1, make sure switch 1 and 2 are pointed away
from ON (Figure
switch 1 is pointed towards ON and switch 2 is pointed away from ON
(Figure 7–33).
8. Replace step pol board and reassemble in reverse order.
7–32). If replacing optional step board 2, make sure
Servicing
Step POL Board Replacement
7-27
43iQ Instruction Manual