Preventive Maintenance - Thermo Scientific 43iQ Instruction Manual

Operation
Settings

Preventive Maintenance

3-54 43iQ Instruction Manual
The Preventive Maintenance screen reminds the user when certain
instrument components need to be serviced/replaced. When the "Months
Left" has decreased to 2, the row is highlighted yellow. If the "Months
Left" is 1 or less, the row is highlighted red and the maintenance icon
(gears) will appear in the status bar located at the bottom of the screen.
Use the  and  buttons to move up and down and the  and 
buttons to move left and right.
Home Screen>Settings>Health Check>Maintenance>Preventive
Maintenance
The Preventive Maintenance screen contains the following information:
Across:
G
Component: Device to be routinely serviced or replaced.
G
Interval in Months: Expected period of time before a component
G
needs to be checked and/or serviced.
Months Left: Count down timer in months. Remaining time since
G
the beginning of the service interval. When the value is 1 or less,
the row will be highlighted and it is suggested that the component
should be checked and/or serviced.
Reset: Once the component is serviced/replaced, the user presses the
G
Reset button and the "Months Left" value resets to the "Service
Interval in Months" value.
Alert: Allows the user to opt out of receiving preventive
G
maintenance alerts. Displays Enabled/Disabled for each
component.
Thermo Scientific