Peripherals Support Board And System Controller Board Replacement; Figure 7-19. Replacing The Peripherals Support Board - Thermo Scientific 43iQ Instruction Manual

Peripherals
Use the following procedure to replace the peripherals support board or
system controller board.
Support Board
and System
1. Turn instrument OFF, unplug power cord, and remove the cover
Controller Board
(Figure 2–1).
Replacement
2. Pull tab out (two per board).
3. Pull board out.
Figure 7–19. Replacing the Peripherals Support Board
4. Replace board and reassemble in reverse order.
43iQ Instruction Manual Thermo Scientific