Advertisement
Operation
Calibration
Adjust Span Coefficient
3-20
43iQ Instruction Manual
The Adjust Span Coefficient screen is used to manually adjust the span
coefficient.
The following screen is shown in single range mode and dual or auto range
mode. In dual or auto range modes, "High Range" or "Low Range" is
displayed to indicate the calibration of the high or low coefficient. The
Adjust High Range Span Coefficient and Adjust Low Range Span
Coefficient screens function the same way.
Home Screen>Calibration>Advanced>Manual Calibration>Adjust
Span Coefficient (single range mode)
Home Screen>Calibration>Advanced Calibration>Manual
Calibration>Adjust High Range Span Coefficient (dual or auto range
mode)
The Adjust Span Coefficient screen contains the following information:
Adjust Span Coefficient: User manually adjusts span coefficient when in
G
single range mode.
Adjusted Concentration: Read only. Shows adjusted concentration based
G
on adjusted span coefficient when in single range mode.
Thermo Scientific
Advertisement
Chapters
