Advertisement
Thermo Scientific
Lamp Voltage: Displays the current lamp voltage.
G
Lamp Intensity: Displays the current lamp intensity.
G
Down:
G
Manual Entry: Shows current value. If pressed, user can manually
G
set the detector gain value.
Auto Cal: When pressed, the detector's auto-calibration process is
G
initiated. Please allow up to 5 minutes for calibration to complete.
User can stop calibration by pressing the Stop button under
Detector Gain.
End Cal: When pressed, the auto calibration is interrupted and the
G
value does not change.
Default Values: When pressed, the default gain for the lamp
G
intensity detector is restored.
Home Screen>Settings>Measurement Settings>Advanced Measurement
Settings>Optical Bench Settings>Continue To PMT Settings Screen
The PMT Settings screen contains the following information:
Across:
G
Description: Defines the actions the user can do.
G
PMT Supply: User can manually adjust the PMT supply value, read
G
target and calibration concentration, start/stop automatic
calibration, read voltage, frequency and zero offset frequency
values, and reset default values.
Current PMT: Displays the current PMT voltage value.
G
Units: Displays units for each item.
G
Operation
Settings
3-73
43iQ Instruction Manual
Advertisement
Chapters
