Delete A Route Assignment - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

2 - 2 0
communication from the Beltpack to another Beltpack and/or other type
of control panel.
• A single pushbutton press causes an audio route to be made to the Beltpack
from the destination. This is normally used when listening to an external
audio signal which is not originating from another Beltpack or control
panel.
• A single pushbutton press causes a bi-directional audio route to be made
between the Beltpack to the destinations. This is normally used between
Beltpacks and other control panels.
If talk/listen cannot be locally assigned, the display will show an error message:

DELETE A ROUTE ASSIGNMENT

This facility allows you to delete a route assignment from a pushbutton (key).
This is one of the procedures which requires Selection of Key and Page. The
procedure is as follows:
• Ensure that the display is showing the appropriate page.
• Navigate to the waste bin icon symbol on the Pushbutton Menu.
• Press pushbutton C which deletes the route assignment and takes the
display back to the Pushbutton menu.
If deleting the assignment is not permitted, the error message is displayed.
E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M