Set Factory Defaults; Button Options Menu - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

Hide thumbs Also See for ECLIPSE DIGITAL WIRELESS:

Table of Contents

2 - 1 0

• Press button C to disable microphone noisegate. The microphone menu will

be redisplayed.

• Press button C to enable micrphone noisegate. The microphone menu will be

redisplayed. To exit without changing the status of the microphone noisegate

use the scroll keys to select the exit symbol and press button C.

SET FACTORY DEFAULTS

To reset the beltpack to the factory defaults go to the main programming menu

and select Set Factory Defaults.

The factory defaults options are NO to cancel the operation or YES to default all

the user settable parameters such as limiters and levels to the factory settings.

Select NO to cancel or use the scroll buttons to select YES to reset.

When the beltpack is reset to factory defaults and confirmation message is

displayed.

Press any key to return to the main menu.

• Select Button options on the programming menu.

E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M

Table of Contents

Do you have a question about the ECLIPSE DIGITAL WIRELESS and is the answer not in the manual?