Latch Latch - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

2 - 1 8
4. The Beltpack does not display any routes until it has downloaded all of them
and displays while it is doing so.
5. When downloaded, the display presents the full list of ports
.
6. Navigate the list using the UP and DOWN arrows and press Enter to select
the required route.
If the route cannot be assigned, the display will show either
or
as appropriate.
Note: Do not confuse this display with Adopting a "Role" in the operation
volume. The displays are similar but the two operations are quite different and
unrelated.

LATCH LATCH

This facility allows you to specify whether a particular pushbutton, in normal
operation, is latching, non-latching or both. This is one of the procedures which
requires Selection of Key and Page.
The procedure is as follows:
1. Ensure that the display is showing the appropriate page.
2. Navigate to the latch function symbol on the Pushbutton menu.
3. Select the required icon and press Enter. The options have the following
meanings:
• When a pushbutton is configured as latching, pressing and releasing it
causes the function to remain enabled. Press it again to toggle the function
concerned.
E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M