Rf Carrier Mask; Connection Info; Adjust Contrast - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

Hide thumbs Also See for ECLIPSE DIGITAL WIRELESS:

Table of Contents

RF Carrier Mask

The RF carrier mask tells the matrix and beltpacks which of the standard DECT

carrier frequencies to use. In Europe, for example, the standard carriers 0 to 9

(1880 to 1900 MHz) are designated as "0x03FF000000." Other parts of the

world, such as South America, use Extended Carriers, such as 18 to 27 (1910 to

1930 MHz), designated as "0x0000007FE0." The DECT stacks in both the

transceiver/antenna and the beltpack must be told which group of 10 carrier

frequencies to use via the "mask," when they are first initialized.

Connection Information defines all of the various DECT information for the

beltpack transmission and link to the transceiver/antenna. It also gives the

Carrier Number and Slot that the beltpack is currently using (this can

dynamically change as needed during use). In addition, the Received Signal

Strength Indication (RSSI) is numerically indicated, with 55 being the highest

value; also, the error percentage is shown.

Adjust Contrast provides a slide bar going from "-"to "+", allowing the user to

adjust the contrast on the display. Typical range is between 1/2 and 3/4 toward

"+".

1 - 1 4

E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M

Table of Contents

Do you have a question about the ECLIPSE DIGITAL WIRELESS and is the answer not in the manual?