Ptt Configuration; The Status (Information) Menu - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

Hide thumbs Also See for ECLIPSE DIGITAL WIRELESS:

Table of Contents

2 - 1 2

• Press button C to set the Tap Latch mode.

PTT CONFIGURATION

PTT configuration allows a PTT switch to be enabled or disabled.

Note: These features are not operational on Eclipse wireless systems.

• To configure PTT set to the Button options menu and use the scroll keys to

select PTT configuration.

• The PTT configuration menu will be displayed. Use the scroll buttons to

enable or disabled the PTT switch.

Use button C to set the PTT switch status.

This function appears after you have selected the Information symbol from the

the main programming menu.

• The Status (Information) menu showing the Role Information icon selected.

Note that this face icon is used in two different menus. It appears in the

Talk/Listen menu to denote the Talk and Listen mode and it is used here, in

the Status submenu to denote Role Information.

When this icon is selected the display appears showing the Role name and the

Role number which represents it.

E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M

Table of Contents

Do you have a question about the ECLIPSE DIGITAL WIRELESS and is the answer not in the manual?