Talk/Listen Menu - Clear-Com ECLIPSE DIGITAL WIRELESS User Manual

E C L I P S E W I R E L E S S C O M M U N I C A T I O N S Y S T E M
• Non-latch means the key is momentary and the function is enabled only for
as long as the key is held pressed.
• In this condition, if the pushbutton is pressed and immediately released it
latches. If it is held pressed for longer than one second it becomes
non-latching and the function is disabled as soon as the pushbutton is
released.
• Dual Talk/Listen is included here as it is effectively an extension of the
latching function.
If the key latching cannot be locally assigned, the display will show an error
message:

TALK/LISTEN MENU

This facility allows you to determine whether a particular route, in normal
operation, is for Talk, Listen or Talk and Listen. This is one of the procedures
which requires Selection of Key and Page.
The procedure is as follows:
1. Ensure that the display is showing the appropriate page.
2. Navigate to the two-way symbol on the Pushbutton menu.
3. Select the appropriate icon and press Enter.
The options have the following meanings:
• A single pushbutton press causes an audio route to be made from the
Beltpack to the desired destination(s). This is normally used for
2 - 1 9