Table of Contents
Advertisement
6.5
API Support (CGOS)
In order to benefit from the above mentioned non-industry standard feature set, congatec provides an API that allows application software
developers to easily integrate all these features into their code. The CGOS API (congatec Operating System Application Programming
Interface) is the congatec proprietary API that is available for all commonly used Operating Systems such as Win32, Win64, Win CE, Linux.
The architecture of the CGOS API driver provides the ability to write application software that runs unmodified on all congatec CPU modules.
All the hardware related code is contained within the congatec embedded BIOS on the module. See section 1.1 of the CGOS API software
developers guide, which is available on the congatec website.
6.6
GPIOs
The conga-PA5 SBC provides four GPIs and four GPOs via the congatec board controller. The GPI/GPO signals are routed to the feature
connector X20.
6.7
Thermal/Voltage Monitoring
The CPU onboard the conga-PA5 monitors the system temperature while the congatec Board Controller monitors the +12V input voltage and
input current.
6.8
External System Wake Event
The conga-PA5 supports LAN, power/sleep/LID buttons and PCIe driven wake up events.
6.9
Security Features
The conga-PA5 has an integrated Intel
Note
You can enable/disable the integrated Intel
Menu"), navigate to "Advanced Setup" and then "Platform Trust Technology". Always disable fTPM if you use an external TPM.
Copyright © 2017 congatec GmbH
PTT (TPM 2.0). Additionally, an Infineon SLB9670 (LPC TPM 2.0) is assembled.
®
PTT (TPM 2.0) in BIOS Setup: Enter BIOS Setup (see section 8.1 "Navigating the BIOS Setup
®
PA50m112
45/48
Advertisement
Table of Contents
Need help?
Do you have a question about the conga-PA5 Pico-ITX SBC and is the answer not in the manual?
Questions and answers