Giga Bit-Ethernet: Lan A, B - Contec IPC Series User Manual

Giga bit-Ethernet: LAN A, B

This product is equipped with 2 ports for giga bit.
- Network type
- Transmission speed *
- Max. network path length
- Controller
Table 4.4. Giga bit-Ethernet Connector
LAN
Transmit Link
LED LED
8 1
LEDs for display of network statuses:
Link LED
Right LED Normal connection: Green ON
Operation LED
Left LED
CAUTION
- Attention should to be paid to the guaranteed operating range of temperature in using 1000BASE-T.
For more details on this, refer to chapter3, Installation Requirements. Note that the Ethernet should
be configured as 100BASE-TX or 10BASE-T in using under the temperature 0 - 50°C.
- When non-OS pre-install model is used, LAN-1, LAN-2 might not be assigned for silk printing
"LAN-A", "LAN-B".
PT-956SxX Series User's manual
: 1000BASE-T/100BASE-TX/10BASE-T
: 1000M/100M/10M bps
: 100m/segment
: Intel I210IT controller
Pin No.
100BASE-TX
1 TX+
2 TX-
3 RX+
4 N.C.
5 N.C.
6 RX-
7 N.C.
8 N.C.
Operation: Green Blinking
10M: Off
100M: Green
1000M: Orange
Function
1000BASE-T
TRD+(0)
TRD-(0)
TRD+(1)
TRD+(2)
TRD-(2)
TRD-(1)
TRD+(3)
TRD-(3)
4. Each Component Function
29