Security - Contec IPC Series User Manual

Security

Configure the security of the system settings.
Aptio Setup Utility - Copyright (C) 20xx American Megatrends, Inc.
Main Advanced
Password Description
If ONLY the Administrator's password is set ,
then this only limits access to Setup and is
only asked for when entering Setup.
If ONLY the user's password is set , then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
The password length must be
In the following range:
Minimum length
Maximum length
Administrator Password
User Password
▶Secure Boot menu
Version x.xx.xxxx. Copyright (C) 20xx American Megatrends, Inc.
Figure 5.19. Security
Administrator Password
Set the Administrator Password.
Press Enter to display the following screen for entering the password.
Administrator Password
Create New Password
Confirm New Password
Enter a password at least 3 characters long twice.
To disable the password, enter the Administrator Password entry screen again.
User Password
Set the user password.
Press Enter to display the following screen for entering the password.
Create New Password
Confirm New Password
Enter a password at least 3 characters long twice.
To disable the password, enter the Administrator Password entry screen again.
PT-956SxX Series User's manual
Chipset Security
3
20
[****
[****
User Password
[****
[****
Boot Save &
Exit
→←:Select Screen
↑↓:Select Item
Enter:Select
+/-:Change Opt.
F1:General Help
F2:Previous Values
F3:Load Defaults for
Win7
F4:Save & Exit
F5:Load Defaults for
Win10
ESC:Exit
]
]
]
]
5. BIOS Setup
61