As-I Bus Connection; Information About The Device Types; As-I And Power Supply Terminal Assignments - Pepperl+Fuchs AS-I 3.0 PROFINET Manual

AS-i 3.0 PROFINET Gateway in Stainless Steel
Electrical connection
7.2

AS-i bus connection

Blue
AS-i-
Yellow ASi ribbon cable
Information!
Electrical work is to be performed only by electrical technicians.
7.3

Information about the device types

Information!
A listing of the individual devices and their features can be found in section <Product
information>.
7.4

AS-i and power supply terminal assignments

Information!
The cable indicated by grey must not have slaves or repeaters connected to it.
The yellow cable must not have AS-i power suppliers or additional masters connected
to it.
Information!
The function ground can be connected either to the grounding screw or to the terminal.
The function ground should be made with as short a cable as possible to ensure good
EMC characteristics.
Therefore function grounding using the grounding screw is preferred.
24
Brown
AS-i+
Blue
AS-i-
2-conductor AS-i round cable
(Recommended: flexible power cable
H05VV-F2x1,5 per DIN VDE 0281)
Brown
AS-i+