Data Compatible; Data In The Device And On The Chip Card Identical; Data In The Device And On The Chip Card Not Identical - Pepperl+Fuchs AS-I 3.0 PROFINET Manual

AS-i 3.0 PROFINET Gateway in Stainless Steel
Electrical connection
From this time on all changes are made both in the device and on the chip card.
7.7.1.4

Data compatible

When starting with an empty device (e.g. after a factory reset) a non-empty card
is found whose data are compatible with the device, the following message is dis-
played:
The card configuration is written to the device. From this time on all changes are
made both in the device and on the chip card.
7.7.1.5

Data in the device and on the chip card identical

If the card and device are not empty at start and the data are identical, no mes-
sage is displayed.
7.7.1.6

Data in the device and on the chip card not identical

If the card and device are not empty at start and the data are not identical, an er-
ror message is displayed and the card is not synchronized with the device. The
following menu is then automatically opened:
Description
CHIP CARD>MASTER: Chip card data are copied to the master
MASTER->CHIPCARD: Master data are copied to the chip card
The menu can be exited by pressing the ESC/Service key without changing the
data.
30
CHIPCARD FOUND
AS-I DATA WILL
BE SYNCHRONIZED
AS-I DATA FROM
CHIPCARD TAKEN
CHIPCARD AND
AS-I DATA
DIFFERENT
CARD->MASTER
MASTER->CARD
CONTINUE
NEXT: No change to the data