Table of Contents
Advertisement
AS-i 3.0 PROFINET Gateway in Stainless Steel
Configuration of AS-i/PROFINET Gateways
10.
Configuration of AS-i/PROFINET Gateways
This section includes information for the configuration of the AS-i 3.0 PROFINET
Gateway in a PROFINET network.
10.1
Projecting PROFINET network
The configuration tool needs information about the bus participants for the projec-
ting of a PROFINET network. These information is provided from the manufactur-
ers of bus participants as "equipment master data" in GSDML files.
During the configuration, the GSDML file must be imported into the PROFINET
configuration tool.
The AS-i/PROFINET Gateway appears then in the hardware catalog as:
"PROFINET IO/Other field devices/Gateway/Pepperl+Fuchs AS-interface".
Information!
The device name of the AS-i 3.0 PROFINET-Gateway is: "". Any PROFINET partici-
pant will be identified over this name. That means that every PROFINET participant
has to become a precise name with the help of AS-i Control Tools.
The name of the gateways is "" per default.
This must be changed to the requested name during the projecting!
10.2
Logical slots
10.2.1
Options
The GSD file offers several combinations (several lengths) for transmitting I/O da-
ta, the command interface , as well as AS-i 16 bit data. This allows them to be
transmitted directly as part of the process data channel.
Up to 30 modules can be configured
Possible options:
Length
16 byte I
20 byte I
32 byte I
Information!
Up to four command interfaces can be integrated.
description
digital input (slave 0 - 31)
digital input (slave 0 - 7b)
digital input (slave 0 - 31B)
Tab. 10-2.
41
Advertisement
Table of Contents
