Pepperl+Fuchs AS-I 3.0 PROFINET Manual page 63

AS-i 3.0 PROFINET Gateway in Stainless Steel
System startup using AS-i Control Tools
Configuring the AS-i network is easily accomplished by first connecting each AS-i
slave separately to the AS-i line and setting its address, followed by pressing the
button "Store configuration" to store the existing AS-i network in the AS-i master
as configuration data.
Furthermore, an AS-i Address Assistant is available, allowing to perform an
address change of a new AS-i slave to the desired address as soon as it is con-
nected to the AS-i network. The desired AS-i configuration can be created offline
ahead of time and can be stored to a file. When setting up the system the AS-i
slaves are then simply connected, one at a time, to the AS-i network. Further de-
scriptions to all additional features of this software can be obtained from the inte-
grated help file.
63