Pepperl+Fuchs AS-I 3.0 PROFINET Manual page 58

AS-i 3.0 PROFINET Gateway in Stainless Steel
Configuration of AS-i/PROFINET Gateways
Coding of status bytes
Bit [7]
0
1
The cyclical output identifier contains the 4 Safety Monitor bits 1.Y1, 1.Y2, 2.Y1
and 2.Y2. The monitoring element "Monitor input" and the start elements "Monitor
Start-Monitor Input" and "Activation using Monitor Input" access these data. In
contrast, the "Feedback circuit" element always accesses the EDM input.
Outputs
byte description
1 byte from the fieldbus
bit 4 ... 7: reserved
2 reserved
The bits of the output bytes are ORed with the real and the homonymous hard-
ware inputs of the device.
Safety Control Status
Length
2 byte I
1 byte O
4 byte I
1 byte O
6 byte I
2 byte O
8 byte I
2 byte O
10 byte I
3 byte O
12 byte I
3 byte O
58
status or color
no device flashing red
at least one device flas-
hing red
bit 0: 1.Y1
bit 1: 1.Y2
bit 2: 2.Y1
bit 3: 2.Y2
description
Safety Ctrl/Status (2 OSSD)
Safety Ctrl/Status (4 OSSD)
Safety Ctrl/Status (6 OSSD)
Safety Ctrl/Status (8 OSSD)
Safety Ctrl/Status (10 OSSD)
Safety Ctrl/Status (12 OSSD)
Tab. 10-25.
Tab. 10-26.
Tab. 10-27.