Figure 1-6 Scsi Tray Assembly - Sun Microsystems SPARCserver 1000 Service Manual

8
!
8-4
2. Locate the SCSI tray assembly in the system front.
3. Loosen four captive screws securing the SCSI tray assembly to the chassis.
See Figure 8-2.
Figure 8-3 SCSI Tray Assembly
4. Lift the injector/ejector levers until they are straight out. This action
disengages the SCSI tray assembly from the backplane.
See Figure 8-2.
5. Slide the SCSI tray out of the chassis.
Warning – The SCSI tray assembly may be heavy. Grip it securely before
sliding it all the way out of the chassis or it could fall and injure personnel or
equipment.
SPARCserver 1000 System Service Manual—June 1996
Injector/ejector lever (2)
Captive retaining
screws (4)