General Rules For System Configuration; Selecting Installation Locations; System Master Board - Sun Microsystems SPARCserver 1000 Service Manual

E.1 Selecting Installation Locations
E.2 System Master Board
General Rules for System
Configuration
This appendix lists recommended priorities and locations for:
•
System boards
•
SuperSPARC modules
•
SBus modules
•
SIMMs
•
Drive IDs
•
SCSI cables
•
Ethernet cables
•
Video cables*
Each component described in this appendix has a specific recommended
location. The following sections describe the location for each component.
The system board slot numbers are marked on the card cage. Install system
boards from the lowest card cage slot number (0) to the highest (9). Install filler
panels in all empty slots.
E
E-1