Setting The Module Date - Cabletron Systems Expansion module 6H122-08 User Manual

3. Press ENTER. If the TFTP gateway IP address entered is a valid
format, the cursor returns to the beginning of the TFTP Gateway IP
Address field. If the entry is not valid, the Event Message Line
displays "INVALID TFTP GATEWAY IP ADDRESS OR FORMAT
ENTERED". Local Management does not alter the current value, but
it does refresh the TFTP Gateway IP Address field with the previous
value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The Event Message Line at the top of the screen
displays "SAVED OK".

5.15.5 Setting the Module Date

The modules are year 2000 compliant, so the module date may be set
beyond the year 1999. To set the module date, perform the following
steps:
If the 6C105 chassis has been assigned a chassis date, it is not
NOTE
necessary to assign a module date to the 6H122-08. All
installed modules recognize the chassis date of the 6C105.
1. Use the arrow keys to highlight the Module Date field.
2. Enter the date in an MM/DD/YYYY format.
It is not necessary to add separators between month, day, and
NOTE
year numbers. For example, to set the date to 03/17/1997, type
"03171997" in the Module Date field.
3. Press ENTER to set the system calendar to the date in the input field.
4. Use the arrow keys to highlight the SAVE command at the bottom of
the screen and press ENTER.
If the date entered is a valid format, the Event Message Line at the top of
the screen displays "SAVED OK". If the entry is not valid, Local
Management does not alter the current value, but it does refresh the
Module Date field with the previous value.
6H122-08 User's Guide
General Configuration Screen
5-47