Fe-100Tx Led - Cabletron Systems Expansion module 6H122-08 User Manual

Chapter 4: Troubleshooting
LED Color
Off
Green
TX Amber
Red
LED
10/100
4.2

FE-100TX LED

The optional FE-100TX for the 6H122-08 has one LED labeled 10/100.
The 10/100 LED together with the receive LED allows the user to
determine the link status and the operating speed of the Fast Ethernet
Interface Module. The 10/100 LED and the Receive (RX) LED are shown
in Figure 4-2. Table 4-3
FE-100TX LED when the RX LED is on or off, respectively.
4-4
Table 4-1 LANVIEW LEDs (Continued)
State
Port enabled, and no
activity.
Flashing. Indicates
activity. Rate indicates
data rate.
Blinking. Port in
standby, link.
Flashing. Indicates
collision rate.
Solid. Diagnostic
Failure.
Table 4-2 Port 1-6 10/100 LED Indications
Color
Off
Green
provides a functional description of the
Recommended Action
No action.
No action.
Port may be disabled due to
Spanning Tree. Check network
design and eliminate any
unnecessary loops.
No action.
Contact Cabletron Systems
Global Call Center for
assistance.
Description
No Link or no cable attached. There is a
link and the port is operating at 10 Mbps
operation.
Link. Port is operating at 100 Mbps.
6H122-08 User's Guide