Cabletron Systems Expansion module 6H122-08 User Manual page 145

netstat:
Syntax:
Description:
Options:
Example:
-> netstat -i
Interface + Description
# 1 (ethernet -csmacd)
# 2 (ethernet - csmacd)
# 3 (ethernet - csmacd)
# 4 (ethernet - csmacd)
-> netstat -r
Destination
# Default Route
# 134.141.0.0
# 134.141.0.0
ping:
Syntax:
Description:
Options:
Example:
6H122-08 User's Guide
netstat [option]
The netstat command provides a display of
general network statistics for the managed
device. The netstat command must be used with
one of the two display options.
-i Displays status and capability information for
each interface
-r Displays routing information for each
interface
Speed
MTU
10000000
1514
10000000
1514
10000000
1514
10000000
1514
Next-hop
DirectConnection
DirectConnection
DirectConnection
ping [IP address]
The ping command generates an outbound ping
request to check the status (alive/not alive) of a
device at a specified IP address.
Not Applicable
-> ping 122.144.40.10
122.144.40.10 is alive
Admin Oper MAC Addr
up up 0x00 0x00 0x1d 0x07 0x50 0x0e
up up 0x00 0x00 0x1d 0x07 0x50 0x0f
up up 0x00 0x00 0x1d 0x07 0x50 0x10
0x00 0x00 0x1d 0x07 0x50 0x11
up up
Interface
1
2
3
Network Tools
051470
051471
5-101