C.2 Setting The Mode Switch; C.1 Required Tools; Optional Installations And Mode Switch Bank Settings; Required Tools - Cabletron Systems Expansion module 6H122-08 User Manual

OPTIONAL INSTALLATIONS AND
MODE SWITCH BANK SETTINGS
This appendix covers the following items:
•

Required tools

• Locations, functions, and settings for the mode switches
• Installing Optional Fast Ethernet Interface Modules
C.1 REQUIRED TOOLS
You need the following tools to perform the procedures provided in this
appendix:
• Antistatic wrist strap (provided with 6C105 chassis)
A Phillips screwdriver is required when installing optional Fast
NOTE
Ethernet Interface Modules for ports 7 and 8 into the 6H122-08.
C.2 SETTING THE MODE SWITCH
These switches are set at the factory and do not need to be changed unless
you intend to perform the following:
• Force download a new image file from a BootP server.
• Clear NVRAM and restore all user-entered parameters such as the IP
address and Subnet Masks to the 6H122-08 "Default" configuration
settings.
• Clear user-entered passwords stored in NVRAM and restore the
default passwords.
6H122-08 User's Guide
APPENDIX C
(Section C.1)
(Section C.2)
(Section C.3)
C-1