4
Set the AWB/ABB switch to AWB.
Auto white balance is now activated.
5
Check the result.
Upon completion of auto white balance, "OK" or "NG"
appears on the viewfinder screen. If "NG" appears,
check if the subject meets the conditions described
above and the optical filter setting is appropriate, and
retry from Step 3.
CAUTION:
Be sure to set the R, B GAIN control knob on the OCP or MCP to the center position before activating the auto white balance
from the camera. If the control knob is not at the center position, the control range may be biased.
Note:
To activate the auto white balance from an OCP, press the AWB button in the camera function operation part.
To activate it from an MCP, press the AWB button on the LCD.
AWB Ach
O K
HDK-65C 1501 VER1 (U)
4.6 Auto Setup
④
Set the AWB/ABB switch
to AWB.
4
69