Ikegami HDK-65C Operation Manual page 112

5.2 Settings from the Menu
E4
Turn the rotary pulse switch to position the cursor
on "FILE SET", and press the SET button.
The cursor moves to the mode selection column.
E5
Turn the rotary pulse switch to position the cursor
on "MANUAL", and press the SET button.
E6
Turn the rotary pulse switch to position the cursor
on the AUTO SEL NAME display part, and press
the SET button.
The item changes to "MODEL", and the letters
"CANCEL" flash.
Reference:
If "AUTO SEL NAME" is not set, the AUTO SEL NAME display part does not display the lens model name.
Connect the target lens, perform "AUTO READ", and then follow the procedures below.
Refer to Steps M1 and M2 for performing "AUTO READ".
E7
Turn the rotary pulse switch to switch the cursor
from "CANCEL" to "EDIT", and press the SET
button.
The under submenu "AUTO SEL NAME EDIT" is
displayed.
E8
Turn the rotary pulse switch to position the cursor
on the part for displaying the lens name to be
edited, and press the SET button.
The item changes to the edit mode and ( ) at both ends
flash.
96
ＬＥＮＳ ＳＥＬＥＣＴ
ＮＵＭＢＥＲ
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＡＵＴＯ ＳＥＬ
ＦＩＬＥ ＳＥＴ
ＬＥＮＳ ＴＹＰＥ
ＡＵＴＯ Ｘ０．８ ＣＯＮＶ
ＬＥＮＳ ＳＥＲＩＡＬ Ｉ／Ｆ
ＮＵＭＢＥＲ
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＡＵＴＯ ＳＥＬ
ＦＩＬＥ ＳＥＴ
ＬＥＮＳ ＴＹＰＥ
ＮＵＭＢＥＲ
ＮＡＭＥ （ ）
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＥＸＴＥＮＤＥＲ
ＡＵＴＯ ＳＥＬ
ＦＩＬＥ ＳＥＴ
ＮＵＭＢＥＲ
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＥＸＴＥＮＤＥＲ
ＡＵＴＯ ＳＥＬ
ＦＩＬＥ ＳＥＴ
ＮＵＭＢＥＲ
ＮＡＭＥ （ ）
ＭＯＤＥＬ
ＥＸＴＥＮＤＥＲ
ＡＵＴＯ ＳＥＬ
ＦＩＬＥ ＳＥＴ
ＬＥＮＳ ＴＹＰＥ
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
ＡＵＴＯ ＳＥＬ ＮＡＭＥ ＥＤＩＴ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
ＮＯＷ ＣＯＮＮＥＣＴＥＤ ＬＥＮＳ
（ＡＢ４０Ｘ１０ ＡＢＣＤ ）
HDK-65C 1501 VER1 (U)
ＮＯ．５
ＯＦＦ
ＯＦＦ
E④
ＯＦＦ
＊＊＊
Position the cursor on
ＯＦＦ
"FILE SET" and confirm.
ＯＦＦ
ＮＯ．５
ＯＦＦ
ＯＦＦ
ＭＡＮＵＡＬ E⑤
＊＊＊
Position the cursor on
"MANUAL" and confirm
ＮＯ．５
E⑥
ＯＦＦ
Position the cursor on
ＯＦＦ
the AUTO SEL NAME
ＭＡＮＵＡＬ
display part and confirm.
ＮＯ．５
The letters "CANCEL"
ＣＡＮＣＥＬ
ＯＦＦ flash.
ＯＦＦ
ＭＡＮＵＡＬ
ＮＯ．５
E⑦
ＥＤＩＴ
ＯＦＦ
Switch the cursor to
ＯＦＦ
"EDIT" and press confirm
ＭＡＮＵＡＬ
＊＊＊
(Part for displaying the
lens name to be edited)
Displays the lens model
name to be edited.
(Connected lens name
display part)
Displays the model name
of the lens currently
connected.
E⑧
Position the cursor on
the part for displaying
the lens name to be
edited and confirm.