Ikegami HDK-65C Operation Manual page 11

Regarding the Fiber Connector and the Fiber Optic Cable
Take care for the following:
- When disconnecting the fiber optic cable from the camera or from the CCU/BS, always hold the
fiber connector (plug) and not the cable.
- Do not crush the cable.
- Since there can be various obstacles (such as a corner of a building, glass, rough ground surface)
in places where the cable is connected, do not drag the cable without winding.
- Turn off the power before removing the fiber optic cable.
- The allowable radius of curvature of fiber optic cables is approximately six times of the outer
diameter of cables (approx. 60 mm for a φ9.2mm-wide cable). Do not force to wind less than
specified. Forcible winding can break fiber leads within the cable.
- When connecting a fiber optic cable to a fiber connector, anchor the fiber optic cable with a cable
clamp.
CAMERA CABLE Clamp
Optical Fiber Cable
HDK-65C 1501 VER1 (U)
SAFETY PRECAUTIONS
Radius
Approx. 60mm
Fiber Optic Cable
RET-1 RET-2
BREAKER
/MIC
CAMERA CABLE Clamp
(optional)
vii