Ikegami HDK-65C Operation Manual page 103

■ MENU (2/3)
Menu Item
VIDEO OUTPUT MODE
― SDI OUT
― VF SELECT
― MONITOR OUT
MONI SDI OUT
MID/HIGH GAIN MODE
― MID GAIN
HIGH GAIN
BATTERY WARNING
BATT WARN VOLT
BARS MODE
― BARS MODE
BARS ON
FAN CONTROL
― FAN CONT MODE
― HEAD TOP
― HEAD SIDE
― ADAPTOR
― VF CONT
― FAN CONDITION
― HEAD TOP
― HEAD SIDE
ADAPTOR
H PHASE CONTROL
H PHASE
TIME SETTING
― TIME
DATE (YY/MM/DD)
Initial
Setting value
setting
CAM, HD
CAM
Q-TV,(CAM(1.5G))
Y Y, R, G, B, R+G+B, (R/G/B)
MONI MON, SYNC
MONI, VF, RETURN, HD
MONI
Q-TV
-3 to +9dB *Lower than
+3dB
MID gain
+3 to +12dB *Higher than
+6dB
High gain
11.0V 10.5 to 13.5V
Destination
FULL, MULTI
setting
OFF ON, OFF
AUTO, SLOW,
AUTO
MANUAL, FAST
SSLOW, SLOW, NOR,
FAST
SSLOW, SLOW, NOR,
(information
FAST
display)
SSLOW, SLOW, NOR,
FAST
SLOW,FAST
(information
OK,NG
display)
0.0 -100 to +100
--- HH : MM : SS
--- YY / MM / DD
HDK-65C 1501 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
SDI OUT changes the signal output from the SDI OUT
connector on the rear of the camera.
CAM : Outputs the camera's video signal (main line).
HD Q-TV : Outputs the HDTV Q-TV signal sent from
the CCU when a CCU is connected.
CAM (1.5G) : Selectable only for 3G formats such as
1080/59.94p and 50p.
VF SELECT switches the VF signal. The R/G/B signal can
be selected when the color VF is connected.
MONITOR OUT selects the signal output from the MON
OUT connector on the rear of the camera.
MONI : Outputs the camera signal used for monitoring.
SYNC : Outputs a 3-value synchronized SYNC signal
MON SDI OUT changes the signal output from the MON
OUT connector on the rear of the camera.
MONI : Outputs the monitor signal.
VF : Outputs the VF signal to the monitor.
RETURN : Outputs the RET signal from the CCU to the
monitor when a CCU is connected.
HD Q-TV : Outputs the HDTV Q-TV signal from the CCU
to the monitor when a CCU is connected.
Sets the medium gain value allocated to the M position of
the GAIN SELECT switch.
Sets the high gain value allocated to the H position of the
GAIN SELECT switch.
Sets the battery voltage threshold to display warning.
FULL : Displays the BARS signal conventionally used.
MULTI : Displays the multiformat BARS signal.
Turns the color bar signal ON/OFF.
AUTO ： Automatically changes the cooling fan speed
according to the internal temperature level.
SLOW ： Sets the fan to SSLOW for 5 minutes. After 5
minutes, the mode changes to AUTO.
MANUAL ： Can select the speed of each fan.
FAST ： Set the fan to FAST.
SSLOW ： Fan speed is very slow.
SLOW ： Fan speed is slow.
NOR ： Fan speed is normal.
FAST ： Fan speed is fast.
OK ： Normal
NG ： Fan is stopped.
Adjusts the horizontal phase when using external synch.
Sets so that the phase of the internal SYNC signal matches
the phase of the external SYNC signal. The internal SYNC
advances in the direction of -100 in relation to the external
synch, and delays in the direction of +100.
Can only be set during self-operation.
Sets the time and date when saving the file to the memory
card.
MENU DATA
ALL VF
-
-
-
-
5
-
-
-
-
- -
- -
- -
- -
- -
- -
87