Ikegami HDK-65C Operation Manual page 40

2.1 Camera and Viewfinder
○
25 INCOM TALK SELECT switch
Selects a TALK line of INCOM.
PROD : Talks by using the producer's line.
BOTH : Talks by using both the producer's and engineer's lines.
ENG : Talks by using the engineer's line.
○
26 INCOM-1 PGM2 control knob
Controls the PGM2 volume of the INCOM-1 program intercom.
○
INCOM-1 PGM1 control knob
27
Controls the PGM1 volume of the INCOM-1 program intercom.
○
INCOM-1 INCOM control knob
28
Controls the INCOM-1 intercom volume.
○
29 INCOM-1 MIC switch
Turns ON/OFF the engineer's intercom microphone.
ON : Turns ON the intercom microphone.
OFF : Turns OFF the intercom microphone.
PTT : Turns ON the intercom microphone while this switch is pressed.
○
30 RET-1 SELECT switch
Selects one system from the return video signals of 4 systems that are connected to the
CCU as RET-1 video.
○
RET-2 SELECT switch
31
Selects one system from the return video signals of 4 systems that are connected to the
CCU as RET-2 video.
○
MON SDI connector
32
Outputs the HD SDI signal for monitoring. MAIN, VF, or RETURN can be selected from
the camera menu.
○
HD TRUNK IN connector (option)
33
Inputs the HD SDI signals.
When the camera is operating with FA-97 fiber adaptor and CCU-970, the system allows 3G
(1.5G x2) transmission from the camera head to the CCU.
And the second 1.5G video can be transmitted to the CCU as a video trunk channel.
○
Q-TV2 connector (option)
34
Outputs the Q-TV signals.
The Q-TV signal output function only responds during BS operation.
24
HDK-65C 1501 VER1 (U)