Auto Black Balance - Ikegami HDK-65C Operation Manual

4.6 Auto Setup

Auto Black Balance

Auto black balance can be activated from the camera, OCP, or MCP. This section explains how to activate from the camera.
1
Set the AWB/ABB switch to ABB.
The lens iris is automatically closed, and auto black
balance is now activated.
2
Check the result.
Upon completion of auto black balance, "OK" or "NG"
appears on the viewfinder screen.
CAUTION:
Be sure to set the R/G/B FLARE and MASTER
PEDESTAL control knobs on the OCP to the center
position before activating the auto black balance from
the camera. If the control knobs are not at the center
position, the control range may be biased.
Note:
To activate the auto black balance from an OCP, press
the ABB button in the camera function operation part.
To activate it from an MCP, press the ABB button on
the LCD.
70
ＡＢＢ
ＢＬＫ ＳＥＴ
ＡＢＢ
Ｏ Ｋ
HDK-65C 1501 VER1 (U)
①
Set the AWB/ABB switch
to ABB.