Ikegami HDK-65C Operation Manual page 104

5.2 Settings from the Menu
Menu Item
MEMORY CARD
― SAVE FILE
― ALL DATA
― SNAP SHOT
― SCENE
― REFERENCE
― LENS
MENU DATA
LOAD FILE
― ALL DATA
― SNAP SHOT
― SCENE
― REFERENCE
― LENS
MENU DATA
■ MENU (3/3)
Menu Item
SCAN FORMAT SELECT
― CURRENT
― FORMAT SELECT
― BASE FREQ
― IMAGE SIZE
― FIELD FREQ
― SUBSAMPLING
CHANGE FORMAT
CPU SYSTEM CONTROL
― SEMI SELF MODE
SEMI REMOTE MODE
88
Initial
Setting value
setting
---
---
---
---
---
---
---
---
--- ALL, SELECT NUMBER
---
--- ALL, SELECT NUMBER
--- ALL, VF
Initial
Setting Value
Setting
(Destination
59.94Hz,50Hz
setting)
(Destination
1080I, 1080P, 720P
setting)
(Destination 59.94, 50, 23.98PD,
setting) 29.97SF, 25SF
(Destination
YPbPr422-10bit
setting
READY, EXECUTE,
READY
CANCEL
ON OFF, ON
OFF OFF, ON
HDK-65C 1501 VER1 (U)
Description, Remarks
See (Page 100) for the memory card usage method.
Saves the selected data to the memory card.
Loads all files.
Loads snapshot files.
Possible to select whether to load all from SCENE DATA or
to load individual data from 1 to 8.
Loads the reference file.
Possible to select whether to load all from LENS DATA or to
load individual data from 1 to 8.
Possible to select whether to load all menus from MENU
DATA or only those menus related to VF.
Description, Remarks
Selects the camera operation format during self-contained
operation. Changing the format automatically restarts the
camera. When a CCU is connected, this menu is disabled
because the format set on the CCU side is used.
Displays the present camera operation format.
Selects base frequency.
Selects image size.
59.94 (BASE FREQ.=59.94Hz, IMAGE SIZE
= I080I or 720P)
23.98PD, 29.97SF (BASE FREQ.=59.94Hz, IMAGE SIZE
= I080P)
50 (BASE FREQ.=59.94Hz, IMAGE SIZE
= I080I or 720P)
25SF (BASE FREQ.=59.94Hz, IMAGE SIZE
= I080P)
The camera restarts in the selected format.
When disconnecting the remote controller and operating by
the camera alone after adjusting the camera using the remote
controller.
Sets the semi-remote mode. The ON/OFF setting during
remote (control with remote controller, etc. connected) can
be controlled on the camera side with the GAIN changing
switch, AWB changing switch, output changing switch and
SHUTT/SUP-V switch on the right side of the camera.
In this case, control on the remote controller side is not
possible.
MENU DATA
ALL VF
- -
- -
- -
- -
- -
- -
- -
MENU DATA
ALL VF
- -
- -
- -
- -
- -
- -
- -
- -
-
-