Ikegami HDK-65C Operation Manual page 105

Menu Item
AUTO IRIS SET
― IRIS SET MODE
― IRIS LEVEL SET
― PEAK RATIO SET
― IRIS GAIN
― IRIS SPEED
― IRIS LIMIT
LENS ADJUST
AUTO SETUP MODE
― AUTO SETUP
― FULL AUTO REF
― AWB WITH A.IRIS
― AWB REFERENCE
― ABS MODE
― CHART SEARCH
REFERENCE SET
Initial
Setting Value
Setting
OFF OFF, ON
0 -100 to +100
-70 -100 to +100
50 1 to 100
50 1 to 100
F22 F22, F20, F18, F16
OFF OFF, F2.8, F16
FULL, LEVEL, F.QUICK,
LEVEL
QUICK
INT EXT, INT
OFF ON, OFF
ON ON, OFF
FPN NORMAL, APS, P ONLY
ENABLE ENABLE, DISABLE
ABB
HDK-65C 1501 VER1 (U)
5.2 Settings from the Menu
Description, Remarks
ON : Enables auto-iris operation setting.
If set to ON, the iris adjustment from the remote
controller is disabled.
Adjusts the convergence level of auto iris.
Shoot the registration chart with the camera and adjust the
value so that the video level becomes 75%.
Shoot the gray scale chart with the camera and adjust the
value so that the video level is 100%.
Set the exposure for a bright area in the "+" direction and
for a dark area in the "-" direction. The default value "50"
indicates no exposure compensation.
Sets the auto-iris response sensitivity characteristics.
The auto-iris operation sensitivity is such that "1" is low and
"100" is high.
Hunting tends to occur more often as the value goes up. (Set it
to the default value"50" as long as hunting is not occurring).
Sets the response speed characteristics of the auto-iris.
The auto-iris speed becomes slower for "1" and faster for "100".
If the iris is about to close during auto-iris operation, it stops
the iris operation before it completely closes to prevent iris
hunting.
Sets the iris limit value at that time.
Sets the output of control voltage for fixed iris value during
lens adjustment. To adjust the relationship between the lens
control voltage value and lens iris value, the control voltage
equivalent of F2.8 and F16 can be output to the lens.
AUTO SETUP activates each auto setup.
FULL ： Activates FULL auto setup and initializes
the camera (Activated mainly at the time of
maintenance and inspection.)
LEVEL ： Activates auto setup of the video level.
F.QUICK ： Activates FULL QUICK auto setup. A chart is not
needed since it uses the built-in electric signal.
QUICK ： Activates QUICK auto setup. A chart is not
needed since it uses the built-in electric signal.
FULL AUTO REF specifi es whether to use external
reference or internal reference to activate FULL auto setup.
EXT ： Uses external reference value (user setting).
INT ： Uses internal reference value (factory setting).
AWB WITH A. IRIS specifi es whether to control auto
iris simultaneously with auto white balance when AWB is
activated.
ON ： Forces to set auto iris when AWB is activated.
OFF ： Activates AWB with the current iris mode.
AWB REFERENCE specifi es whether to use the user setting
as AWB convergence value.
ON ： Uses the user setting.
OFF ： Adjusts the GAIN of Rch and Bch so that it matches
the Gch level.
ABS MODE sets the adjustment mode of automatic black
shading.
NORMAL ： Sets the mode to automatic adjustment of black
balance and SAW/PARA black shading.
APS ： Sets the mode to automatic adjustment of black
peak shading as well as NORMAL.
P ONLY ： Sets the mode to automatic adjustment of black
balance and black peak shading.
Detects the auto setup chart during auto setup.
REFERENCE SET sets a reference value for auto setup,
AWB, or ABB to create reference fi le.
FULL ： Sets the reference values for all auto setup items,
except AWB convergence value.
AWB ： Sets the user setting as AWB convergence value.
ABB ： Sets a reference value of pedestal.
MENU DATA
ALL VF
- -
- -
- -
- -
-
-
5
- -
-
-
-
- -
- -
- -
- -
89