Start-Up Procedure - SAMES KREMLIN Inorecip V User Manual

5.6. Start-up procedure

• Step 1: After entering and saving a program, select the required axis(es) with the key (13)
and activate or deactivate the axis number with the key (12). The axis number turns green
when active.
• Step 2: Select the required program number for each axis using the rotating button (10).
• Step 3: Start or stop the automatic cycle for the active axis by pressing the key (14)
14
13
Index revision : A
1000
0
8.0
2
V
0.6
a
3
12
30
9
10
7140