SAMES KREMLIN Inorecip V User Manual page 18

Position the Inorecip V on the Inorecip H moun-
ting plate and fix it with 8 M8 screws.
Pass the electrical cables coming out of the
mounting plate through the access hole (A)
under the Inorecip V electrical box
Reassemble the 2 side covers of Inorecip V using
6 CHC M4 screws per cover.
Fix the cable carrier chain support on the
Inorecip V with 4 screws and fix the cable carrier
chain on its support with 2 screws.
Install the drive and the electronic board
delivered with the 2nd axis box transformation
cable kit (P/N # 130002077).
Connect the electrical wires to the new variator
(C) and the plugs to the new electronic board
(B).
Fix the variator (C) and the electronic board (B)
in the box.
Index revision : A
A
18
Support for
cable carrier
chain
Electrix
box
Electrical
Cables
B C
7140