Grounding Connection - SAMES KREMLIN Inorecip V User Manual

Wiring configuration between the Inomotion and two Inorecip V.
Inorecip V - 1 Inorecip V - 2
Inomotion

4.2.4. Grounding connection

WARNING : it is imperative to connect the Inorecip V to the ground of the control unit or to a
good quality ground.
From the control unit or a good quality ground,
connect a green/yellow protective grounding
cable to the brass screw (A) located on the base
of the Inorecip V.
(A)
Connect a green/yellow protective grounding
cable to a bar or nut of the powder projectors by
(B)
means of a screw (B) for example.
Index revision : A 20 7140