Connecting The Power Cords - Adaptec DURASTOR 6320SS Manual

DuraStor 412R/6320SS/7320SS Installation and User's Guide
13 Install the disk drives. See
instructions on attaching drive carriers to disk drives and
installing disk drives into the storage subsystem.
14 Replace the front bezel. Ensure that it mounts to the two posts
and that the bezel lip fits under the chassis top.
15 Lock the front bezel by turning the screws one-quarter turn to
the right.

Connecting the Power Cords

Once DuraStor is in place, the power cords can be attached and
secured.
1 On the back of the storage subsystem, lift a security bale and
plug in a power cord.
2 Place the bale over the cord. See
power cord from accidental disconnection.
3 Plug the other end of the power cord into a grounded outlet or
UPS power strip.
4 Repeat this process for the other power cord.
Figure 2-5 Attaching the Power Cord Bales
2-6
Disk Drives on page 5-10
Bale fits over
and onto the
power cord.
Figure 2-5. This protects the
for detailed