DuraStor 412R/6320SS/7320SS Installation and User's Guide
General Enclosure Problems
Symptom
Fails to power
ON
6-2
Cause
.
Power cords are
I
not connected
properly.
Power not
I
available at the
outlet.
Power switch not
I
in the proper
position.
Faulty power cord.
I
Faulty power
I
supply.
Solution
Verify that the
I
power cord is
properly connected
to the power
module.
If the enclosure is
I
plugged into a
three-hole
grounded outlet,
verify that power
to the outlet has
not been
interrupted. This
can be
accomplished by
testing the outlet
with a known
working appliance,
such as a lamp.
Be sure that the
I
power switch is in
the
position,
ON
labeled with an I.
Replace the power
I
cord.
Identify the failed
I
PSU, see
Replacing
a PSU on page
If the enclosure is
I
not responding,
contact your
service provider.
5-14.